Technical Manual

smarter locking

The content of this document is subject

To change without notice

Page 5

3. FINAL PRODUCT LABELLING

FCC Label location is on the “Locker Door RFID

Antenna” because Electronic Lock RFID ISO SE is an

OEM product for locker manufacturers and not for

the final customer. At the time of delivery the label is

clearly visible.

Locker manufacturers integrate this product

(Electronic Lock RFID ISO SE) into a final product

(locker) and are responsible for proper labelling of

the final product Therefore final product’s label must

include also a statement “Contains FCC ID:

2ABT8003P1838”.

4. PRODUCT DESCRIPTION

Metra Electronic Lock RFID ISO SE combines a standard proven “Metra Electronic Lock” with “RFID

Lock Driver” and “Locker Door RFID Antenna” while MEW Controller is used to drive it.

Electronic lock is a reliable electro-motor driven lock. It is not a self-latch and electro unlatch model,

but controls both, locking and unlocking. Electronically controlled locking means that there are no

uncertain situations and that lock performs a self-test for unlocking on each cycle. Only hi-tech,

non-corrosive, minimum maintenance parts are used. Patented ball-shape bolt and adjustable

door strike ensure unlocking also under considerable pressure in any direction, thus compensating

for shabby cabinets and hinge wear. RFID lock driver drives and monitors electronic lock connected

to it while it is also a user interface. Build in ISO RFID media reader in combination with Metal Door

RFID Antenna reads ISO 15693, ISO 1443A, ISO 14443 B compatible RFID media and it is suitable

for metal door and non-metal door from thickness of 18 millimetres up to 30 millimetres.

“Locker Door RFID Antenna” boosts and focuses the RFID media reader’s antenna field and can be

installed into a plastic housing such as Metra “Metal Door Strike” or it is integrated directly into the

door.

Electronic Lock is highly secure, with lock’s holding force over 1000 N (depends also on cabinet

structure) and designed to give an alarm signal even before* a break-in occurs (*depends also on

the cabinet, usually when force exceeds 800 N) giving extra time to react. Alarm notification is

triggered even if the strike has been pulled out from the door and remains in the lock. When

unlocked the built-in ejector pushes the door to open.

Multiple Electronic Locks RFID are connected to the MEW Controller which supports emergency

and security features: a pushbutton for emergency opening of all Electronic Locks RFID connected

to it; in case of attempt of break-in an alarm message is distributed over Metra Network Controller

to LAN / WAN and Metra software.