Manualshelf

User Manual

ManualsBrandsMetra Electronics ManualsCar & Vehicle ElectronicsMetra Radio Wiring Harness for M B /L R /Sprinter 94-Up
12
Rev. 6-20-13
Rev. 6-20-13
Rev. 6-20-13
Rev. 6-20-13
Rev. 6-20-13
Rev. 6-20-13
Rev. 6-20-13
Rev. 6-20-13
INST70-9401
INST70-9401
INST70-9401
INST70-9401
INST70-9401
INST70-9401
INST70-9401
INST70-9401
The additional red wire included in this package
is for Smart models 2011-up. Insert the red wire
into the location next to the yellow wire as shown
as pin 10 in the diagram below. For reference,
pins 1-8 are speaker wires and pin 16 is ground.
The additional red wire included in this package
is for Smart models 2011-up. Insert the red wire
into the location next to the yellow wire as shown
as pin 10 in the diagram below. For reference,
pins 1-8 are speaker wires and pin 16 is ground.
The additional red wire included in this package
is for Smart models 2011-up. Insert the red wire
into the location next to the yellow wire as shown
as pin 10 in the diagram below. For reference,
pins 1-8 are speaker wires and pin 16 is ground.
The additional red wire included in this package
is for Smart models 2011-up. Insert the red wire
into the location next to the yellow wire as shown
as pin 10 in the diagram below. For reference,
pins 1-8 are speaker wires and pin 16 is ground.
The additional red wire included in this package
is for Smart models 2011-up. Insert the red wire
into the location next to the yellow wire as shown
as pin 10 in the diagram below. For reference,
pins 1-8 are speaker wires and pin 16 is ground.
The additional red wire included in this package
is for Smart models 2011-up. Insert the red wire
into the location next to the yellow wire as shown
as pin 10 in the diagram below. For reference,
pins 1-8 are speaker wires and pin 16 is ground.
The additional red wire included in this package
is for Smart models 2011-up. Insert the red wire
into the location next to the yellow wire as shown
as pin 10 in the diagram below. For reference,
pins 1-8 are speaker wires and pin 16 is ground.
The additional red wire included in this package
is for Smart models 2011-up. Insert the red wire
into the location next to the yellow wire as shown
as pin 10 in the diagram below. For reference,
pins 1-8 are speaker wires and pin 16 is ground.