Installation Manual

REV. 7/14/2017 INST-2001

DASH DISASSEMBLY 95-2001 OR 99-2001

Oldsmobile Aurora 1995-2003

Unclip the radio trim bezel and remove the bezel. (Figure A)

2. Remove (2) 7mm screws securing the factory radio and

disconnect the wiring.

Note:

For the 2001-2003 models,(3) speed clips and

screws will need to be supplied to attach the kit into the

sub-dash where the screw holes line up with the kit.

Continue to Kit Assembly

(Figure A)

Oldsmobile Achieva 1996-1998

1. Open the glove box, press inward on the walls of the glove

box liner and remove the liner.

2. Remove (10) torx-head screws from the glove box location.

3. Remove (2) 9/32” hex-head screws under the steering

column.

4. Unclip the dash trim bezel. (Figure A)

5. Remove the screws securing the factory radio and

disconnect the wiring.

Continue to Kit Assembly

(Figure A)

Oldsmobile Alero 1999-2004

1. Remove shift knob by using a small screwdriver to remove

U-clip from front of shifter and pull upward.

2. Unclip and remove shifter trim panel.

3. Unclip and remove radio and climate control panel by

pulling from bottom. (Figure A)

4. Remove (3) 9/32” screws from radio and remove.

Continue to Kit Assembly