Installation Manual

REV. 7/14/2017 INST-2001

DASH DISASSEMBLY 95-2001 OR 99-2001

Buick Rendezvous 2002-2007

1. Open center console and remove (2) screws at front of console opening. (Figure A)

2. Remove liners from cup holders and storage pocket next to cup holders, then remove

screws. Unsnap and remove panel. (Figure B)

3. Remove (2) screws from bottom of radio/climate control bezel, unclip and remove.

(Figure C)

4. Remove (3) 9/32” hex-head screws to remove radio. (Figure D)

Continue to Kit Assembly

(Figure A)

(Figure C)

(Figure B)

(Figure D)

Buick Riviera 1996-1999

1. Unsnap left side panel exposing (1) Phillips

screw to remove.

2. Remove (1) Phillips screw and unsnap right

side panel to expose (1) Phillips screw

beneath panel and remove.

3. Unsnap underside of overhanging dash

to unsnap (6) plastic rivets and remove

panel.

4. Remove (5) hex-head screws now exposed

under overhang.

5. Unsnap bottom edge of trim bezel, then

while holding overhang up, unsnap and

remove trim bezel by removing any

necessary harnesses.

6. Remove (3) Phillips screw to remove

climate control.

7. Remove (2) Phillips screws to remove rear

support and (3) 9/32”

Continue to Kit Assembly

(Figure A)

Step 4

Step 3

Step 1

Step 2