Installation Manual

1.800.221.0932
|
MetraOnline.com
6
DASH DISASSEMBLY 95-2001 OR 99-2001
Buick Roadmaster 1995-1996
1. Unclip dash panel sides and remove.
2. Unclip panel below steering column and remove.
3. Remove (2) 7mm screws above instrument cluster.
4. Set parking brake, turn car on, and move shifter to the lowest gear. Tilt steering wheel down
then unsnap entire instrument cluster/radio panel and remove.
5. Remove (3) 7mm screws to remove radio.
Continue to Kit Assembly
(Figure A)
Step 1
Step 2
Step 5
Step 3
Buick Skylark 1996-1998
1. Remove (6) 9/32” screws inside glove box.
2. Under glove box and drivers knee bolster, remove (2) plastic panels by turning (2) 1/4 turn
fasteners per side.
3. Remove (4) 9/32” screws revealed (2 per side).
4. Unsnap panel from driver’s side to passenger’s side.
5. Remove (3) 9/32” screws.
Continue to Kit Assembly
(Figure A)
Step 1 Step 1
Step 1
Step 3
Step 5
Step 3
Step 3