User Guide

37
95-2001 KIT ASSEMBLY
DOUBLE DIN HEAD UNIT PROVISION
STACKED ISO DIN HEAD UNIT(S) PROVISION
Locate the factory wiring harness in
the dash. Metra recommends using
the proper mating adapter from Metra
or AXXESS. Re-connect the negative
battery terminal and test the unit for
proper operation.
1
Attach the Double DIN brackets to the
inside edge of the Double DIN trim
plate. (Figure A)
2
Slide the Double DIN head unit or
stacked ISO head units into the brack-
et/radio housing assembly and secure
the Double DIN head unit or stacked
ISO head units to the assembly using
the screws supplied with the radio.
(Figure B)
3
Reassemble dash in reverse order of
disassembly.
4
Note: For the Buick Le Sabre,
Oldsmobile Auror
a and the Pontiac
Bonneville the (3) speed clips and
scr
ews pro
vided with the kit will
need to be installed into the sub
dash where the screw holes line up
on the kit.
Note #2 -: The spacers included in
this kit ma
y be necessary to adapt
to the slight differ
ences from one
vehicle to another. If the kit/ radio
assembly does not meet the back-
side of the factory radio opening,
use the spacer to eliminate that
space.
*Note: Refer also to the instructions included with the aftermarket radio.
A
B