User Manual

4
Dash Disassembly
1. Unsnap the climate control trim panel (from door
to door) and remove (4) Phillips screws exposed.
(Figure A)
2. Pop out the a/c vents and remove (1) Phillips screw
exposed in each vent cavity. (Figure A)
3. Unclip the radio trim bezel and remove.
4. Remove the screws securing the factory head unit
and disconnect the wiring.
Continue to kit assembly
Buick Le Sabre/Buick Park
Avenue 1995-1999
(Figure A)
4. Remove (3) 9/32” hex-head screws to remove
radio. (Figure D)
Continue to kit assembly
Buick Rendezvous
2002-2007
(Figure A)
2. Unsnap and remove
trim along center of
dash (one piece on
right and one on left
of wheel).
3. Unsnap and remove
radio/instrument bezel.
4. Remove (2) screws in
order to remove radio.
Continue to kit
assembly
Buick Le Sabre/Buick Park
Avenue 2000-2005
(Figure A)
1. Open drivers door and unsnap and remove dash
end cap.
Buick Le Sabre/Buick Park
Avenue 2000-2005
1. Open center console and remove (2) screws at
front of console opening. (Figure A)
2. Remove liners from cup holders and storage
pocket next to cup holders, then remove screws.
Unsnap and remove panel. (Figure B)
3. Remove (2) screws from bottom of radio/climate
control bezel, unclip and remove. (Figure C)
Buick Rendezvous
2002-2007
(Figure C)
(Figure B)
(Figure D)
1 1 11 1
2
2
2 2
4
4
4