User Manual

ManualsBrandsMetra Electronics ManualsAutomobile Accessories95-7510HG

APPLICATIONS

METRA. The World’s best kits.

™

metraonline.com1-800-221-0932

REV. 2/20/2014 INST95-7510

CAUTION: Metra recommends disconnecting the

negative battery terminal before beginning any

installation. All accessories, switches, and especially

air bag indicator lights must be plugged in before

reconnecting the battery or cycling the ignition.

NOTE: Refer to the instructions included with the

aftermarket radio.

INSTALLATION INSTRUCTIONS FOR PART 95-7510

• Double DIN radio provision

• Stacked ISO radio provision

• Two finishes available: 95-7510 = Black,

95-7510HG = Gloss Black

• A) Radio/Climate control housing • B) Radio brackets • C) Rear support • D) Interface

• E) Wiring harnesses • F) (2) Climate control extension harnesses • G) (4) Plastic panel clips

KIT FEATURES

KIT COMPONENTS

WIRING & ANTENNA CONNECTIONS (sold separately)

Wiring Harness: • Harness included

Antenna Adapter: • Not required

• Panel removal tool • Phillips screwdriver

• Socket set • Small flat blade screwdriver

• Cutting tool

TOOLS REQUIRED

Mazda RX-8 2004-2008

95-7510, 95-7510HG

B C D E

Dash Disassembly

– Mazda RX-8 2004-2008 ....................................2-3

Kit Assembly

– Double DIN and stacked ISO radio provisions ....... 4

– Interface installation ..........................................5-6

F G

Table of Contents

Summary of content (16 pages)

PAGE 1
INSTALLATION INSTRUCTIONS FOR PART 95-7510 APPLICATIONS Table of Contents Mazda RX-8 2004-2008 95-7510, 95-7510HG Dash Disassembly – Mazda RX-8 2004-2008....................................2-3 Kit Assembly KIT FEATURES • Double DIN radio provision • Stacked ISO radio provision • Two finishes available: 95-7510 = Black, 95-7510HG = Gloss Black – Double DIN and stacked ISO radio provisions ....... 4 – Interface installation..........................................
PAGE 2
95-7510 FM1 877 Dash Disassembly AC 5. Remove (2) Phillips screws from the bottom of the radio/climate control panel. (Figure F) 1. Unscrew the shift knob counter clockwise to remove. (Figure A) 2. Unclip and remove the shifter trim panel. (Figure B) 3. Remove (2) Phillips screws from the bottom of the ashtray assembly then unclip and remove the assembly. (Figure C) FM1 877 6. Unsnap radio/climate control panel including radio chassis. Unplug and remove panel and chassis.
PAGE 3
95-7510 Dash Disassembly 8. Remove (4) screws securing the radio chassis to the radio/climate control panel. (Figure I) 9. Remove (6) screws securing the climate controls from the radio/ climate control panel. Unplug and remove the climate controls. (Retain the screws and climate controls for re-use during kit assembly.) (Figure J) FM1 877 10. Remove (17) screws securing the circuit board to the radio/climate control panel to access the plug for the hazard switch assembly. (Figure K) 11.
PAGE 4
95-7510 Kit Assembly Double DIN or stacked ISO radio provisions Kit Preparation 1. Cut the top (2) mounting locations off of the climate controls to provide clearance for the aftermarket radio. (Figure A) 2. Secure the climate control to the radio/climate control housing using (4) of the factory screws removed in step (10) of the dash disassembly. (Figure B) 1. Attach the Double DIN brackets to the Double DIN or stacked ISO Mount radio(s) using the hardware supplied with the radio(s). (Figure A) 2.
PAGE 5
95-7510 Interface Installation Warning: failure to insert the HVAC cables into the correct location will cause damage to the interface and make the display and HVAC controls not function properly Note: start the vehicle and hold the “AUTO” button for 10seconds to program the kit to function in auto climate control equipped vehicles. 1. Attach the (2) climate control extension harnesses to the temperature control cable and the fan control cable on the factory climate control. 6.
PAGE 6
TILT FM1 877 AC OPEN 95-7510 Display Customization *Note: Refer also to the instructions included with the aftermarket radio. 5. To change the Hour press the rear defrost button to the right of the A/C Mode button. 1 0 6. To change the minute press the A/C button at the top of the A/C Mode button. 2 3 7. At any time if you do not press any buttons for 5-seconds the display will save and return to the default screen and the climate control buttons will return to their normal configuration.
PAGE 7
95-7510 Notes 7
PAGE 8
INSTALLATION INSTRUCTIONS FOR PART 95-7510 KNOWLEDGE IS POWER REV. 2/20/2014 INST95-7510 Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow. Metra recommends MECP certified technicians METRA. The World’s best kits.™ 1-800-221-0932 metraonline.
PAGE 9
INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 95-7510 APLICACIONES Índice Mazda RX-8 2004-2008 95-7510, 95-7510HG Desmontaje del tablero – Mazda RX-8 2004-2008....................................2-3 Ensamble del kit CArACtEríStICAS dEL kIt • Provisión de radio doble DIN • Provisión de radio de montaje ISO vertical • Dos acabados disponibles: 95-7510 = Negro, 95-7510HG = Negro brillante – Provisiones de radio DIN e ISO vertical ................. 4 – Instalación de la interfaz ..............................
PAGE 10
95-7510 FM1 877 AC Desmontaje del tablero 1. Desatornille el contador de la perilla de la palanca de velocidades hacia la izquierda para quitarlo. (Figura A) 5. Quite los (2) tornillos Phillips de la parte inferior del panel de control del radio/clima. (Figura F) (Figura A) 6. Suelte a presión el panel de control de radio/clima, incluyendo el chasís del radio. Desconecte y quite el panel y el chasís. (Figura G) (Figura D) (Figura B) 7.
PAGE 11
95-7510 Desmontaje del tablero 8. Quite los (4) tornillos Phillips que sujetan el chasís del radio al panel de control del radio/clima. (Figura I) 9. Quite los (6) tornillos que sujetan el control de clima del panel de control del radio/clima. Desconecte y quite los controles del clima. (Conserve los tornillos y los controles del clima para reutilizarlos durante el ensamble del kit.) (Figura J) FM1 877 10.
PAGE 12
95-7510 Ensamble del kit Provisiones de radio de montaje doble DIN o ISO vertical Preparación del kit 1. Corte las (2) ubicaciones superiores de montaje de los controles del clima para dar espacio para el radio de mercado secundario. (Figura A) 2. Sujete el control de clima a la carcasa del control de radio/ clima con los (4) tornillos de fábrica que quitó en el paso (1) del desensamble del tablero. (Figura B) 3.
PAGE 13
95-7510 Instalación de la interfaz Advertencia: si no se insertan los cables HVAC en el lugar correcto, se ocasionará daño a la interfase y los controles de HVAC no funcionarán correctamente. Nota: encienda el vehículo y mantenga presionado el botón “AUTO” durante 10 segundos para programar el kit para que funcione en vehículos equipados con control de clima automático. 1.
PAGE 14
TILT FM1 877 AC OPEN 95-7510 Personalización de la pantalla *Nota: También consulte las instrucciones incluidas con el radio de mercado secundario. 1 0 5. Para cambiar la hora, presione el botón de deshielo trasero a la derecha del botón de modo A/C. 6. Para cambiar los minutos, presione el botón de A/C arriba del botón de modo A/C. 2 3 A/C 7.
PAGE 15
95-7510 Notas 7
PAGE 16
INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 95-7510 EL CONOCIMIENTO ES PODER sus habilidades deIS instalación y KMejore NOWLEDGE POWER REV. 2/20/2014 INST95-7510 Enhance your installation and fabrication skills by fabricación inscribiéndose en la escuela de enrolling in the most recognized and respected dispositivos electrónicos móviles más reconocida mobile electronics school in our industry. y respetada de nuestra industria. en Log onto www.installerinstitute.