User Guide

95-7951 KIT ASSEMBLY
5
STACKED ISO MOUNT UNITS PROVISION
* Note: Refer also to the instructions included with the aftermarket radio.
E
F
Snap the Double DIN brackets to the out-
side edge of the Double DIN trim plate.
(Figure E)
1
Slide the stacked ISO units into the brack-
et/trim plate assembly and secure the units
to the assembly using the screws supplied
with the units.e
(Figure F)
2
Continue to final assembly.
NOTE: The Verona 2004-2007 sub dash will
need to be trimmed slightly for proper fit.
Refer to illustration.
(Figure C,D)
CUT
HERE
ON BOTH SIDES
D
C
B
A
NOTE: For the Chevrolet Aveo 2004-06,
Chevrolet Aveo Hatchback 2007, Pontiac
G3 Hatchback
2007 and Suzuki Verona
2004-07, cut and remove front lower mount-
ing tabs from the Double DIN trim plate
(Figure A). For the Suzuki Forenza 2004-07 and
the
Suzuki Reno 2005-07, cut the rear lower
mounting tabs (Figure B).