User Manual

ManualsBrandsMetra Electronics ManualsCar & Vehicle Electronics95-8242G Double DIN Installation Dash Kit for 2013-Up Toyota Rav4 Vehicles, (Grey)

INSTALLATION INSTRUCTIONS FOR PART 95-8242G

APPLICATIONS

METRA. The World’s best kits.

™

metraonline.com1-800-221-0932

REV. 7/22/2013 INST95-8242G

CAUTION: Metra recommends disconnecting the

negative battery terminal before beginning any

installation. All accessories, switches, and especially

air bag indicator lights must be plugged in before

reconnecting the battery or cycling the ignition.

NOTE: Refer to the instructions included with the

aftermarket radio.

Table of Contents

• Double DIN radio provision

• Painted gray to match factory finish

• A) Radio Trim Panel • B) Radio Brackets • C) (4) Clip legs • D) (8) #4 x 3/8” Phillips screws

KIT FEATURES

KIT COMPONENTS

WIRING & ANTENNA CONNECTIONS (sold separately)

Wiring Harness: • 70-1761 Toyota Harness • TYTO-01 premium sound interface

Antenna Adapter: • 40-LX11

Toyota Rav4 2013-up

95-8242G

Dash Disassembly

– Toyota Rav4 2013-up ........................................... 2

Kit Assembly

– Double DIN radio provision ................................... 3

B C D

• Panel removal tool • Phillips screwdriver

• Socket Wrench

TOOLS REQUIRED

Summary of content (4 pages)

PAGE 1
INSTALLATION INSTRUCTIONS FOR PART 95-8242G APPLICATIONS Table of Contents Toyota Rav4 2013-up 95-8242G Dash Disassembly – Toyota Rav4 2013-up ........................................... 2 Kit Assembly – Double DIN radio provision ................................... 3 KIT FEATURES • Double DIN radio provision • Painted gray to match factory finish KIT COMPONENTS • A) Radio Trim Panel • B) Radio Brackets • C) (4) Clip legs • D) (8) #4 x 3/8” Phillips screws REV.
PAGE 2
95-8242G Dash Disassembly Note: This vehicle is equipped with a vehicle customization menu in the radio. Use the factory radio screen to set these vehicle settings as desired prior to radio removal and they will stay as they were set. 1. Unclip and remove the trim panel above the radio across the passenger side. (Figure A) 2. Unsnap and remove the vents from either side of the factory radio. (Figure B) (Figure A) (Figure B) 3.
PAGE 3
95-8242G Kit Assembly Double DIN radio provision 1. Mount the (4) panel clip legs to the radio trim panel with the provided (8) #4 Phillips screws. Attach the (4) factory panel clips to the legs. (Figure A) 2. Mount the aftermarket radio to the radio brackets using the screws supplied with the radio. (Figure B) 3. Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Test the unit for proper operation. (Figure A) (Figure B) 4.
PAGE 4
INSTALLATION INSTRUCTIONS FOR PART 95-8242G KNOWLEDGE IS POWER REV. 7/22/2013 INST95-8242G Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow. Metra recommends MECP certified technicians METRA. The World’s best kits.™ 1-800-221-0932 metraonline.