User Manual

95-8242G
Kit Assembly
Double DIN radio provision
1. Mount the (4) panel clip legs to the
radio trim panel with the provided
(8) #4 Phillips screws. Attach the
(4) factory panel clips to the legs.
(Figure A)
2. Mount the aftermarket radio to the
radio brackets using the screws
supplied with the radio. (Figure B)
3. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Test the
unit for proper operation.
4. Mount the radio/bracket/trim panel
assembly into the dash.
5. Snap the radio trim panel over the
new radio and reassemble dash in
reverse order of disassembly.
3
(Figure A) (Figure B)
Clip locations