User Manual

99-6518B
4
Sub-dash modification:
1. Remove the rubber cover from
inside the pocket on top of the
dash, and then remove (1) screw
exposed.
2. Remove (2) screws below the
radio cavity. (Figure A)
3. From inside the radio cavity,
remove (2) screws securing the
metal, radio sub-dash bracket,
and then discard. (Figure B)
4. Carefully cut the plastic from the
bottom rear portion of the radio
cavity, down to the metal brace.
(Figure C)
Continue to kit assembly
(Figure C)
(Figure B)(Figure A)
Remove screws
Remove sub-dash
bracket
Carefully cut and remove
Jeep Cherokee Sport 2014-up (Continued)
Dash Disassembly