99-7337B TABLE OF CONTENTS Dash Disassembly - KIA Soul 2010-11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Kit Assembly - ISO Head Unit Provision. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Final Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 *Note: Refer also to the instructions included with the aftermarket radio.
99-7337B DASH DISASSEMBLY KIA SOUL 2010-11 A 1 Disconnect the negative battery terminal to prevent an accidental short circuit. 2 Unclip and remove the radio/climate control trim panel. (Figure A) 3 Remove (4) Phillips screws securing the climate control. (Figure B) 4 Remove (4) Phillips screws securing the radio. (Figure C) B Continue to kit assembly.
99-7337B KIT ASSEMBLY ISO HEAD UNIT PROVISION *Note: Refer also to the instructions included with the aftermarket radio. A 1 Attach the ISO brackets to the radio housing. (Figure A) 2 Slide the head unit into the bracket / radio housing assembly and secure using the ISO screws supplied with the radio. (Figure B) 3 Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS.
99-7337B FINAL ASSEMBLY FINAL ASSEMBLY A (A) Strip wire ends back 1/2" B B) Twist ends together C) Solder D) Tape C D 1 Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter and making connections as shown. (Isolate and individually tape off the ends of any unused wires to prevent electrical short circuit.) 2 Re-connect the negative battery terminal and test the unit for proper operation. 3 Reassemble radio and dash assemblies in reverse order of disassembly.
99-7337B NOTES 4
99-7337B NOTES 5
99-7337B INSTRUCTIONS 1-800-221-0932 REV. 09/01/10 © COPYRIGHT 2004-2010 www.metraonline.
