Installation Manual

99-7523S
Manual Climate Control
(continued)
8. Remove the (2) small Phillips
screws securing the light
bulb boards on each side of
the backlight dispersion bar.
Note: Notice how they are
positioned in the backlight
dispersion bar as they will
be placed in the 99-7523S
the same way. (Figure H)
9. Remove (4) Phillips
screws securing backlight
dispersion bar and knob
trim bezels. (Figure I)
Dash Disassembly
4
10. Push the bottom edges of
the knob trim bezels from
the front side to the back
and slide both pieces out as
one radio. (Figure J)
11. Remove (4) Phillips screws
securing the radio display
harness bracket to the radio
chassis then unclip and
remove the radio display
harness. (Figure K)
Continue to kit assembly
(Figure H) (Figure J)
(Figure I) (Figure K)