User Manual

99-7862
1. Unsnap and remove shift lever
trim ring. (Figure A)
2. Unsnap coin tray/ashtray from
assembly and remove. The rubber
cover may come out first but entire
assembly must be removed to
access screws below. (Figure B)
3. Remove (2) Phillips screws from
under coin tray/ashtray and
remove entire assembly. (Figure C)
4. Remove (2) Phillips screws from
bottom of pocket assembly and
unsnap and remove. (Figure D)
5. Remove (2) Phillips screws facing
up under radio/climate control
assembly. (Figure E)
6. Unsnap and remove upper panel
(including a/c vents) and remove
(3) Phillips screws behind the
panel. (Figure F)
Tip: You can use a hook tool to
grasp the panel inside of the
vent and pull toward the rear
of the vehicle. Be careful not to
scratch the panel.
7. Unclip and remove radio/climate
control assembly.
Continue to kit assembly
Dash Disassembly
R
N
D
D
R
P
N
D
D
R
N
D
D
R
N
D
D
(Figure A) (Figure D)
(Figure B) (Figure E)
(Figure C) (Figure F)
2