User Manual

99-7862
Kit Assembly
(Figure A) (Figure A)
(Figure B) (Figure B)
DIN radio provision
1. Snap the DIN cage into the radio
housing and secure by bending the
metal locking tabs down.
(Figure A)
2. Slide the aftermarket radio into the
cage and secure. (Figure B)
3. Make wiring connections using the
Metra/EIA Wiring Code chart shown
on back page, and the instructions
included with the radio.
4. Disconnect the main harness from
the factory radio, and connect
the included Radio “T” Harness
between this harness, and the
OE radio.
5. Reassemble dash in reverse order
of disassembly.
ISO DIN radio provision
1. Mount the ISO brackets to the
radio with the screws supplied
with the radio. (Figure A)
2. Slide the radio into the radio
opening until the side clips engage.
Snap the trim plate into the radio
housing. (Figure B)
3. Make wiring connections using the
Metra/EIA Wiring Code chart shown
on back page, and the instructions
included with the radio.
4. Disconnect the main harness from
the factory radio, and connect
the included Radio “T” Harness
between this harness, and the
OE radio.
5. Reassemble dash in reverse order
of disassembly.
3