Radio User Manual

4
99-9105
KIT ASSEMBLY
Slide the Double DIN radio into the
Double DIN bracket/radio housing
assembly and secure the unit to the
kit using the screws supplied with
the radio.
(Figure C)
3
Cut and remove center divider
from radio housing.
(Figure A)
1
Snap the Double DIN brackets to the
inside edge of the radio housing.
(Figure B)
2
Snap the Double DIN trim-plate onto
the housing/radio assembly.
(Figure D)
4
DOUBLE DIN RADIO PROVISION
A
B
C
D
Continue to final assembly.