Installation Instructions

Tech Support: 386-257-1187
www.MetraOnline.com
460 Walker Street, Holly Hill, FL 32117
2. Group
Manage Menu
Select the top left corner to bring out the Group Manage
Menu. Find and select the controller to pair. Bluetooth
on the smart device must be switched on.
3. Shake Sel
ection
Select the top right corner to bring out the Settings
Menu. The shake feature will randomly select a color
every time your phone is shaken.
4. Modify Pin Sequence
If red, green, and blue do not match the rock light
illumination, the Pin Sequence, in the settings menu, can
be used to reconfigure the outputs (1). Click (2) to save
wh en configuration is completed.
5. RGB Value Selector
1. Click to open the RGB Value Selector.
2. Slide the R - G - B bar to change the RGB value, or press
t he minus '-' or plus '+' buttons to change the RGB value.
3. Each color has a range of 0 to 255.
4. Click 'Cancel' or 'OK' when setup completed.