Product Info
Table Of Contents
- 1.SUMMARY OF STANDARDS AND RESULTS
- 2.GENERAL INFORMATION
- 3.POWER LINE CONDUCTED EMISSION TEST
- 4.RADIATED EMISSION TEST
- 5.CONDUCTED SPURIOUS EMISSIONS
- 6.BAND EDGE COMPLIANCE TEST
- 7.6dB Bandwidth Test
- 8.OUTPUT POWER TEST
- 9.POWER SPECTRAL DENSITY TEST
- 10.ANTENNA REQUIREMENT
Standard-Tech Co., Ltd. Testing Center.
Standard-Tech Co., Ltd. Testing Center. Page
35
of
35
10.ANTENNA REQUIREMENT
10.1. Standard Applicable
For intentional device, according to FCC 47 CFR Section 15.203, an intentional radiator
shall be designed to ensure that no antenna other than that furnished by the responsible
party shall be used with the device. And according to FCC 47 CFR Section 15.247 (b), if
transmitting antennas of directional gain greater than 6dBi are used, the power shall be
reduced by the amount in dB that the directional gain of the antenna exceeds 6dBi.
10.2. Antenna Connected Construction
The antennas used for this product are PCB antenna that no antenna other than that furnished
by the responsible party shall be used with the device, the maximum peak gain of the transmit
antenna is -3dBi.
````````````````````````````````````````````````````````End of Report``````````````````````````````````````````````````````