Installation Instructions

ManualsBrandsMetra Electronics ManualsElectronicsWireless rearview system

Table Of Contents

空白页面

iBEAMUSA.comiBEAM Vehicle Safety Sytems

REV. 07/20/2020 INSTTE-WKMR43

Attention!

When testing the aftermarket

equipment, ensure that all factory equip-

ment is connected before cycling the key to

ignition.

TE-WKMR43

INSTALLATION INSTRUCTIONS

#IBEAMSAFETY

Installation............................................................2-3

Wireless Pairing .....................................................4

Display Settings .....................................................5

Wire Lenths ............................................................6

Specifications ......................................................... 7

TABLE OF CONTENTS

TOOLS REQUIRED

• Wire stripper

• Tape

• Digital Multi-meter

• Cutter

Universal Wireless 4.3” Mirror/Monitor

and Camera

Visit iBEAMUSA.com for more detailed informatuon about the product and up-to-date vehicle specific

applications.

Product Features

• Wireless camera and mirror/monitor kit

• 4.3” LCD Monitor

• 20 M / 65 FT range

• DC socket for monitor power with USB for smart device charging

• Video triggered by the camera’s signal

Part Components

A) Mirror/Monitor B) Camera w/ dual mounting options C) Accessories

A B C

Summary of content (9 pages)

PAGE 1
B iBEAMUSA.com ©COPYRIGHT 2020 METRA ELECTRONICS CORPORATION C B) Camera w/ dual mounting options C) Accessories iBEAM Vehicle Safety Sytems ® A A) Mirror/Monitor Part Components REV. 07/20/2020 INSTTE-WKMR43 Attention! When testing the aftermarket equipment, ensure that all factory equipment is connected before cycling the key to ignition. • Wire stripper • Tape • Digital Multi-meter • Cutter TOOLS REQUIRED • Wireless camera and mirror/monitor kit • 4.
PAGE 2
NOTE: If your vehicle DC socket has power while the vehicle is powered down, you may need to unplug the monitor while parked so the battery does not discharge. 4. Plug the DC socket into the socket in the vehicle. There is an additional USB port on the back of the DC socket so smart device charging can still be done. (Figure B) 2. Plug the DC socket into the mirror and run the wire in the path shown in Figure A and safely hide the wire from being pulled or caught on while operating the vehicle. 1.
PAGE 3
Camera Installation 1. Mount the camera with either the surface mount or the license plate mount. If wanting the surface mount, the two small screws will need to be removed to remove the license plate mount and replace with surface mount. 2. Remove the tail light from the vehicle to allow access to the light bulbs wiring. (If help is needed, review the vehicles owners manual section on replacing the tail light bulbs.) (Figure A) 3. Find the wiring that connects to the reverse bulb.
PAGE 4
Mirror/Monitor to Camera pairing 1. Before operation, the camera and mirror need to be paired to each other. Start by connecting power to both devices. If camera is connected to reverse, the vehicle must be put into the reverse gear. NOTE: Please activate parking brake while pairing for safety. 2. Once both devices are paired, Press the MENU button (middle button) on the mirror and then choose the PAIRING selection. Then press and hold the MENU button for 2 seconds to select PAIRING. 3.
PAGE 5
3. 2. 1. Press the MENU button to enter into the settings menu, use the + and - buttons to navigate to the MIR-FLIP menu. Press and hold the MENU button to enter the MIR-FLIP menu. Figure A Using the + and - buttons to switch between NORMAL, MIRROR, FLIP or MIRROR FLIP. Press the MENU button to exit the settings. Brightness 1. Press the MENU button (middle button) to enter into the settings menu, use the + and buttons (+ = top button, - = bottom button) to navigate to the PICTURE menu.
PAGE 6
4.5 FT 11 FT 386-257-1187 NOTE: To activate and de-activate parking lines, press the top and bottom button on the back on the monitor. 1.5 FT WIRE LENGTHS | iBEAMUSA.
PAGE 7
TV SYSTEM EFFECTIVE PIXEL IP RATING VISUAL ANGLE MIN. ILLUMINATION WORKING VOLTAGE WORKING TEMP. STORAGE TEMP. SCREEN SIZE DISPLAY RESOLUTION ASPECT RATIO POWER CONSUMPTION NTSC 976 X 592 pixels IP67 120 horizantal 170 diagonal 0.1 Lux 9 - 16V -30 C ~ 70 C - 40 C ~ 120 C 4.3 inch LCD 480 X 272 16:9 less than 3 w SPECIFICATIONS REV.
PAGE 8
iBEAM Vehicle Safety Sytems ® iBEAMUSA.com ©COPYRIGHT 2020 METRA ELECTRONICS CORPORATION REV. 07/20/2020 INSTTE-WKMR43 Metra Recommends MECP certified technicians Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow.
PAGE 9
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.