Installation Instructions
Table Of Contents
386-257-1187
|
iBEAMUSA.com
4
Figure A Figure B
WIRELESS PAIRING
Mirror/Monitor to Camera pairing
1. Before operation, the camera and mirror
need to be paired to each other. Start by
connecting power to both devices. If camera
is connected to reverse, the vehicle must be
put into the reverse gear. NOTE: Please acti-
vate parking brake while pairing for safety.
2. Once both devices are paired, Press the
MENU button (middle button) on the mirror
and then choose the PAIRING selection.
Then press and hold the MENU button for 2
seconds to select PAIRING.
3. The monitor will count down 20 seconds to
achieve the pairing of camera to monitor.
Once the pairing has happened, the camera
image will appear. The camera and monitor
are now paired
4. Put the vehicle back into PARK, turn the vehi-
cle off, turn the vehicle back on and shift into
reverse to test the camera and monitor.