Owner's Manual

ManualsBrandsMetra ManualsAudio accessories & installationDash Kit

Metra. The World’s Best Kits.



INSTALLATION INSTRUCTIONS

107-TO1HG

Patent Pending

Attention! Let the vehicle sit with the key

out of the ignition for a few minutes before

removing the factory radio. When testing the

aftermarket equipment, ensure that all factory

equipment is connected before cycling the

key to ignition.

KIT FEATURES

• ISO DDIN radio provision*

• Painted gloss black

KIT COMPONENTS

• A) Radio trim panel • B) Radio brackets • C) #8 x 3/8” Phillips screws (4) • D) #4 x 3/8” Phillips screws (4)

TOOLS REQUIRED

• Panel removal tool • Phillips screwdriver

• 10mm Socket wrench • Cutting tool

TABLE OF CONTENTS

Dash Disassembly ..................................................2

Kit Assembly

–Shallow DDIN radio provision .............................3

–Pioneer modular DDIN radio provision .............4

WIRING & ANTENNA CONNECTIONS

(sold separately)

Visit axxessinterfaces.com or metraonline.com

for harness and interface options

Antenna Adapter: 40-LX11

A B C D

Toyota RAV4 2019-Up

Visit MetraOnline.com for more detailed information about the product and up-to-date vehicle

speciﬁc applications

* Designed for ISO DDIN radios which have an “L” shaped chassis design with the

radio chassis at the bottom of the screen. Compatible with Pioneer modular radios

† Refer to the radio manufacturer for current models

Summary of content (8 pages)

PAGE 1
07-TO1HG I N S TA L L AT I O N I N S T R U C T I O N S Patent Pending Toyota RAV4 2019-Up Visit MetraOnline.com for more detailed information about the product and up-to-date vehicle specific applications KIT FEATURES • ISO DDIN radio provision* • Painted gloss black * Designed for ISO DDIN radios which have an “L” shaped chassis design with the radio chassis at the bottom of the screen.
PAGE 2
DASH DISASSEMBLY 1. Remove the trim panel behind the radio. (Figure A) 2. Remove (4) 10mm screws securing the radio. Unclip and slide out the radio, then unplug and remove. (Figure B) 3. Remove the (6) screws on radio back and separate panels from around the factory radio face. (Figure C) Continue to Kit Preparation (Figure A) (Figure C) (Figure B) 2 1.800.221.0932 | MetraOnline.
PAGE 3
KIT ASSEMBLY Bottom chassis DDIN radio provision 1. Using pliers or cutting tool, remove the shown inside mounting tabs from the radio brackets. (leave the smallest inner mounting tabs) (Figure A) 2. Secure the radio to the radio brackets with screws supplied with radio. (Figure B) 3. Secure the radio/bracket assembly to the radio trim panel using (4) Phillips screws provided. (Figure C) Remove shaded areas 5.
PAGE 4
KIT ASSEMBLY Pioneer Modular DDIN radio provision 5. Assemble the radio assembly into the factory radio panels using the outside (4) factory screws (screws are also provided if needed). (Figure D) Note: For steps 1 and 2, reference the installation manual provided with the radio for which hardware to use. The display screen and radio chassis use two different types of screws. 1. Secure the radio display to the radio brackets using (4) screws supplied with the radio. (Figure A) 2.
PAGE 5
REV.
PAGE 6
1.800.221.0932 | MetraOnline.
PAGE 7
107-TO1HG I N S TA L L AT I O N I N S T R U C T I O N S Having difficulties? We’re here to help. Contact our Tech Support line at: 386-257-1187 Or via email at: techsupport@metra-autosound.com Tech Support Hours (Eastern Standard Time) Monday - Friday: 9:00 AM - 7:00 PM Saturday: 10:00 AM - 7:00 PM Sunday: 10:00 AM - 4:00 PM ® KNOWLEDGE IS POWER Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.
PAGE 8
107-TO1HG Toyota RAV4 2019-Up Visit MetraOnline.com for more detailed information about the product and up-to-date vehicle specific applications. D ISO DDIN radio provision * P Painted gloss black * Designed for ISO DDIN radios which have an “L” shaped chassis design with the radio chassis at the bottom of the screen.