Owner's Manual

REV. 3/5/2021 INST107-GM5B

1515

STEERING WHEEL CONTROL SETTINGS (CONT.)

Changing radio type

1. If the LED ﬂashes do not match the radio you have connected, you must manually program

the interface to tell it what radio it is connected to.

2. After (3) seconds of turning the key on, press and hold the Volume-Down button on the

steering wheel until the L.E.D. in the interface goes solid.

3. Release the Volume-Down button; the L.E.D. will go out indicating we are now in Changing

4. Radio Type mode.

5. Refer to the Radio Legend to know which radio number you would like to have

programmed.

6. Press and hold the Volume-Up button until the L.E.D. goes solid, and then release. Repeat

this step for the desired radio number you have selected.

7. Once the desired radio number has been selected, press and hold the Volume-Down button

on the steering wheel until the L.E.D. goes solid. The L.E.D. will remain on for about (3)

seconds while it stores the new radio information.

8. Once the L.E.D. goes off, the Changing Radio Type mode will then end. You can now test the

steering control wheel controls.

Note: If at any time the user fails to press any button for a period longer than (10) seconds, this

process will abort.

Radio legend

1. Eclipse (Type 1)

2. Kenwood

3. Clarion (Type 1)

4. Sony/Dual

5. JVC

6. Pioneer/Jensen

7. Alpine

8. Visteon

9. Valor

10. Clarion (Type 2)

11. Metra OE

12. Eclipse (Type 2)

13. LG

14. Parrot

15. XITE

16. Philips

17. TBD

18. JBL

Continued on the next page