Owner's Manual

REV. 3/5/2021 INST107-GM5B
1717
STEERING WHEEL CONTROL SETTINGS (CONT.)
Remapping the steering wheel control buttons
Let’s say you have interface initialized and you want to change the button assignment for the
steering wheel control buttons. For example, you would like Seek-Up to become Mute. Follow
the steps below to remap the steering wheel control buttons:
1. Ensure the interface is visible so you can see the L.E.D. flashes to confirm button recognition.
Tip: Turning the radio off is recommended.
2. Within the first twenty seconds of turning the ignition on, press and hold the Volume-Up
button on the steering wheel until the L.E.D. goes solid.
3. Release the Volume-Up button, the L.E.D. will then go out; The Volume-Up button has now
been programmed.
4. Follow the list in the Button Assignment Legend to reference the order in which the steering
wheel control buttons need to be programmed.
Note: If the next function on the list is not on the steering wheel, press the Volume-Up
button for (1) second until the L.E.D. comes on, and then release the Volume-Up button. This
will tell the interface that this function is not available and it will move on to the
next function.
5. To complete the remapping process, press and hold the Volume-Up button on the steering
wheel until the L.E.D. in the interface goes out.
Button assignment legend
1. Volume-Up
2. Volume-Down
3. Seek-Up/Next
4. Seek-Down/Prev
5. Source/Mode
6. Mute
7. Preset-Up
8. Preset-Down
9. Power
10. Band
11. Play/Enter
12. PTT (Push to Talk) *
13. On-Hook *
14. Off-Hook *
15. Fan-Up *
16. Fan-Down *
17. Temp-Up *
18. Temp-Down *
* Not applicable in this application
Note: Not all radios will have all of these commands. Please refer to the manual provided
with the radio, or contact the radio manufacturer for specific commands recognized by that
particular radio.
Continued on the next page