Owner's Manual

REV. 3/5/2021 INST107-GM5B
3
DASH DISASSEMBLY
(CONT.)
NAV Models
7. For NAV equipped models, motorize the
screen up, unclip the left & right legs
securing the trim over the top of the
motorized display screen, then lift up to
remove the trim. (Figure F)
7a. Unplug the control panel and lift
up enough to access the (2) 9/32”
screws and 10mm nut. Plug the
control panel back in and power
the screen down to remove the
control panel. (Figure G)
Note: if the airbag light is
unplugged during this process be
sure not to cycle the ignition
7b. Unclip, unplug, and remove the
control panel. (Figure H)
Both NAV and non-NAV
8. Remove (4) 9/32” screws securing the
radio chassis. Slide the chassis out, then
unplug and remove. (Figure I)
Continue to Kit Preparation
(Figure I)
(Figure F)
(Figure G)
(Figure H)