Owner's Manual

REV. 3/5/2021 INST107-GM5B
5
KIT PREPARATION
(CONT.)
(Figure D)
(Figure F)
(Figure E)
From the factory control panel:
Both NAV and NON-NAV
4. Remove (6) Phillips screws securing the
clock panel. Unplug and remove.
(Figure D)
5. Remove (10) Phillips screws securing the
control button panel, then unplug and
remove the panel. (Figure E)
6. Remove (16) Phillips screws securing the
inner housing, unplug the lower climate
controls. then remove the housing from
the outer silver trim. (Figure F)
Continued on the next page