Owner's Manual

1.800.221.0932
|
MetraOnline.com
8
K I T A S S E M B LY
Pioneer Modular DDIN radio provision
Note: For steps 1 and x, reference the
installation manual provided with the radio
for which hardware to use. The display
screen and radio chassis use two different
types of screws.
1. Secure the display screen to the Pioneer
display brackets using (6) screws
supplied with the radio. (Figure A)
2. Connect the RGB extension cable to the
display, then route the cable downward
where the factory radio chassis
was located.
3. Using the factory screws, secure the
display screen assembly to the dash
where the factory display was located.
(Figure B)
4. Secure the Pioneer chassis brackets
to the radio chassis using (4) screws
supplied with the radio. (Figure C)
5. Using the factory screws, secure the
chassis assembly to the dash where the
factory chassis was located. (Figure B)
Continue to Axxess Interface
Installation
(Figure C)(Figure A)
(Figure B)