Installation Instructions

ManualsBrandsMetra ManualsAudioHyundai Sonata 2020-Up Car Kit

Metra. The World’s Best Kits.

INSTALLATION INSTRUCTIONS

107-HY1

Patent Pending

Attention! With the key out of the ignition,

disconnect the negative battery terminal

before installing this product. Ensure that all

installation connections are secure before

cycling the ignition to test this product.

KIT FEATURES

• Designed speciﬁcally for Pioneer modular 6.8” radios like the

DMH-C2550NEX and DMH-C2500NEX.

†† Refer to the radio manufacturer for current models

• Painted to match factory with a gloss black face, bright silver trim,

and matte black back plate.

Note – Pioneer extension cable required for installation. Sold separately.

KIT COMPONENTS

• A) Front panel • B) Back panel • C) Brackets • D) Silver trim • E) #8 x 3/8” Phillips screws (7) • F) Panel clips (4)

TOOLS REQUIRED

• Panel removal tool • Phillips screwdriver

TABLE OF CONTENTS

Dash Disassembly ..................................................2

Kit Assembly ..........................................................3

A CB D

Hyundai Sonata 2020-Up

Visit MetraOnline.com for more detailed information about the product and up-to-date vehicle

speciﬁc applications

WIRING & ANTENNA CONNECTIONS

(sold separately)

Wiring Harness:

Visit metraonline.com for audio/

video and steering wheel control interface options.

Antenna Adapter: 40-KI10

Summary of content (4 pages)

PAGE 1
07-HY1 I N S TA L L AT I O N I N S T R U C T I O N S Patent Pending Hyundai Sonata 2020-Up Visit MetraOnline.com for more detailed information about the product and up-to-date vehicle specific applications TABLE OF CONTENTS Dash Disassembly...................................................2 Kit Assembly...........................................................3 KIT FEATURES • Designed specifically for Pioneer modular 6.8” radios like the DMH-C2550NEX and DMH-C2500NEX.
PAGE 2
DASH DISASSEMBLY 1. Unclip the trim behind the radio and remove (2) Phillips screws exposed. (Figures A,B) 4. Remove (2) Phillips screws securing the a/c vent panel, then unclip, unplug, and remove. (Figure E) 2. Open the passenger door, then remove the trim panel from the side of the dashboard. Remove (1) Phillips screw exposed. (Figure C) 5. Remove (3) screws securing the radio. Unclip and slide the radio out, then unplug and remove. (Figure F) 3. Unclip and remove the trim directly below the radio.
PAGE 3
KIT ASSEMBLY Pioneer Modular DDIN radio provision 5. Attach the (4) panel clips to the back panel (Figure B) Note: For steps 1 and 2, reference the installation manual provided with the radio for which hardware to use. The display screen and radio chassis use two different types of screws. 6. Secure the radio screen display to the back panel using (4) of the screws supplied with the radio. (Figure C) 7. Place the silver trim betwixt the back panel and the front panel.
PAGE 4
107-HY1 I N S TA L L AT I O N I N S T R U C T I O N S Having difficulties? We’re here to help. Contact our Tech Support line at: 386-257-1187 Or via email at: techsupport@metra-autosound.com Tech Support Hours (Eastern Standard Time) Monday - Friday: 9:00 AM - 7:00 PM Saturday: 10:00 AM - 7:00 PM Sunday: 10:00 AM - 4:00 PM ® KNOWLEDGE IS POWER Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.