Installation Instructions

1.800.221.0932
|
MetraOnline.com
2
1. Unclip the trim behind the radio and
remove (2) Phillips screws exposed.
(Figures A,B)
2. Open the passenger door, then remove
the trim panel from the side of the
dashboard. Remove (1) Phillips screw
exposed. (Figure C)
3. Unclip and remove the trim directly
below the radio. (Figure D))
DASH DISASSEMBLY
4. Remove (2) Phillips screws securing the
a/c vent panel, then unclip, unplug, and
remove. (Figure E)
5. Remove (3) screws securing the radio.
Unclip and slide the radio out, then
unplug and remove. (Figure F)
Continue to Kit Preparation
(Figure A) (Figure D)
(Figure B) (Figure E)
(Figure C) (Figure F)