User Manual

REV. 8/28/2019 INST108-CH2B
3
DASH DISASSEMBLY
(CONT.)
3
4. Unsnap and remove the entire center
dash panel. (Figure D)
5. Remove (4) 9/32” screws securing the
radio/display screen. Slide the screen
out, then unplug & remove. (Figure E)
6. The factory rear support will need to be
cut or removed to allow space for the
aftermarket radio. Different variations
of this support may require additional
cutting. (Figure F)
Continue to Kit Assembly
(Figure D) (Figure E) (Figure F)
Remove shaded area