Installation Instructions

ManualsBrandsMetra ManualsAudioMetra Ford F-250/350/450/550XL 2017-Up Premium Dash Kit

INSTALLATION INSTRUCTIONS

108-FD7B

Metra. The World’s Best Kits.



Attention! Let the vehicle sit with the key

out of the ignition for a few minutes before

removing the factory radio. When testing the

aftermarket equipment, ensure that all factory

equipment is connected before cycling the

key to ignition.

Patent Pending

KIT FEATURES

• Designed speciﬁcally for the Pioneer DMH-C5500NEX 8-inch radio

• Painted scratch-resistant matte black to match the

factory color and ﬁnish

KIT COMPONENTS

• A) Radio trim panel • B) Radio brackets • C) Switch housing • D) #8 x 3/8” Phillips screws (3) • E) #6 x 3/8” Phillips screws (4) • F) Panel clips (6)

TOOLS REQUIRED

• Panel removal tool • Phillips screwdriver

• 9/32” socket wrench • Torx screwdriver

WIRING & ANTENNA CONNECTIONS

(sold separately)

Wiring Harness: XSVI-5524-NAV

Antenna Adapter: 40-EU10

Steering wheel control interface: ASWC-1

A B C D E E

*Visit MetraOnline.com for up-to-date vehicle speciﬁc applications.

TABLE OF CONTENTS

Dash Disassembly ..................................................2

Kit Preparation .......................................................2

Kit Assembly ..........................................................3

Ford F-250/350/450/550 XL

(w/o color screen)

2017-up*

Summary of content (4 pages)

PAGE 1
08-FD7B I N S TA L L AT I O N I N S T R U C T I O N S Patent Pending Ford F-250/350/450/550 XL (w/o color screen) 2017-up* *Visit MetraOnline.com for up-to-date vehicle specific applications.
PAGE 2
DASH DISASSEMBLY 1. Remove the storage mat in the pocket above the climate-control/radio trim panel, then remove (2) 9/32” screws exposed. (Figure A) 2. Unclip and remove the pocket, then remove (2) 9/32” screws exposed. (Figure B) 3. Unclip, unplug, and remove the climatecontrol/radio trim panel. Continue to Kit Preparation (Figure A) (Figure B) 2 KIT PREPARATION From the factory climate-control/radio trim panel: 1. Remove (4) Torx screws securing the climate control panel, then remove. (Figure A). 2.
PAGE 3
KIT ASSEMBLY Note: For steps 1 and 2, reference the installation manual provided with the radio for which hardware to use. The display screen and radio chassis use two different types of screws. 4. Slightly unclip the middle ac vent panels in preparation for the next step. 5. Remove (4) screws in the dash cavity, then secure the completed assembly into the dash using those screws. (Figure C) 1. Secure the radio brackets to the radio chassis using (4) screws supplied with the radio. (Figure A) 2.
PAGE 4
108-FD7B I N S TA L L AT I O N I N S T R U C T I O N S If you are having difficulties with the installation of this product, contact our Tech Support line either by phone at 386-257-1187, or email at techsupport@metra-autosound.com. Before doing so, look over the instruction booklet a second time and ensure that the installation was performed exactly as the instruction booklet is stated. Have the vehicle apart and ready to perform troubleshooting steps before contacting Metra/Axxess Tech Support.