Installation Guide

ManualsBrandsMetra ManualsAudio accessories & installationFloating Kit

Metra. The World’s Best Kits.

INSTALLATION INSTRUCTIONS

109-UN02

Attention! Let the vehicle sit with the key

out of the ignition for a few minutes before

removing the factory radio. When testing the

aftermarket equipment, ensure that all factory

equipment is connected before cycling the

key to ignition.

Patent Pending

KIT FEATURES

KIT COMPONENTS

• A) Assembly mount • B) Display housing • C) Display trim ring • D) Display brackets • E) Display brackets (5-degree angle)

• F) (4) #8 x 1/2” Phillips screws • G) (4) 4mm Allen head screws

A B C D E

Floating Mount Kit Pioneer 9-inch

TOOLS REQUIRED

• Phillips screwdriver

• 4mm Allen head screwdriver

TABLE OF CONTENTS

Preface ....................................................................2

Kit Assembly ..........................................................3

WIRING & ANTENNA CONNECTIONS

(sold separately)

RGB Extension Cable: CD-RGB150E

(not sold by Metra)

The 109-UN02 is a universal mount

designed to “ﬂoat” the Pioneer 9-inch

screen in front of a vehicle’s original

radio location using a series of brackets

that provide the ability to easily mount

the radio’s chassis into the radio/

pocket location of more than 250

existing Metra Double-DIN kits for 1990

to current vehicle applications.

• Engineered exclusively for the new

9-inch Pioneer

Modular Solutions

Receiver (DMH-WC6600NEX) Radio

• A complete housing encases

the Pioneer 9-inch screen

• Patent-pending design

Summary of content (4 pages)

PAGE 1
09-UN02 I N S TA L L AT I O N I N S T R U C T I O N S Patent Pending Floating Mount Kit Pioneer 9-inch KIT FEATURES The 109-UN02 is a universal mount designed to “float” the Pioneer 9-inch screen in front of a vehicle’s original radio location using a series of brackets that provide the ability to easily mount the radio’s chassis into the radio/ pocket location of more than 250 existing Metra Double-DIN kits for 1990 to current vehicle applications.
PAGE 2
PREFACE • The 109-UN02 is designed to work with select newer Metra dash kits (sold separately). When assembling the dash kit, follow the instructions for an ISO DIN radio provision with pocket. a) The 109-UN02 assembly mount will take place of the pocket provided with the dash kit. b) The Pioneer radio chassis will take place of the aftermarket radio. • The 109-UN02 can be installed in many different configurations to fit many applications, and can also be customized to take adjustments even further.
PAGE 3
KIT ASSEMBLY Note: For steps 2 and 6, reference the installation manual provided with the radio for which hardware to use. The display screen and radio chassis use two different types of screws. 5. Complete all instruction steps provided with the Metra dash kit. 1. Secure the display brackets to the assembly mount using (4) Allen head screws provided. (Figure A) 7. Clip the display trim ring onto the assembly. (Figure E) 6.
PAGE 4
109-UN02 I N S TA L L AT I O N I N S T R U C T I O N S Having difficulties? We’re here to help. Contact our Tech Support line at: 386-257-1187 Or via email at: techsupport@metra-autosound.com Tech Support Hours (Eastern Standard Time) Monday - Friday: 9:00 AM - 7:00 PM Saturday: 10:00 AM - 7:00 PM Sunday: 10:00 AM - 4:00 PM ® KNOWLEDGE IS POWER Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.