Owner's Manual

Tools Required
Soldering
Iron
Solder
(Rosin Core
Suggested)
Electrical
Tape
Receiver Wiring Adaptor Connections
C. Solder:
1. Heat wire.
2. Touch solder to wire, not to iron.
Page 2
Tools Required
Crimp Tool/
Wire Stripper
Crimp Caps
A. Strip wires back 1/2”.
B. Twist wires together and
insert in crimp cap.
C. Squeeze middle of cap
for tight connection.
A. Strip wires back 1/2”.
B. Twist wires together.
D. Tape
CRIMP METHOD SOLDER METHOD
120 70-5003


Copyright 2010 Crutchfield Corporation
R