Owner's Manual

Match wires below to the matching function of each wire on your receiver (refer to instructions supplied with receiver). The wire colors of your
new receiver may, or may not, match the wire colors of the adaptor. Match adaptor and receiver wires by function, disregarding color.
Your receiver illumination wire could be Orange or Orange/White. As with other wires, match this wire to the illumination wire in this harness
by function, not by color. If your receiver does not have an illumination wire, tape off the illumination wire.
Individually tape off any unused wires.
Make speaker wiring connections following instructions on the next page.
Make final wiring connections following instructions on page 3.
Receiver Wiring Adaptor &
Amplifier Bypass Wiring Harnesses
120 70-6512
Revision 08/23/17
STEP 1 -- CONNECT WIRES
*120706512*
IMPORTANT
Before starting, compare items on your invoice with items
received. Thoroughly check packing materials. If an item
is missing, please call
Crutchfield at 1-888-955-6000.
Copyright 2017 Crutchfield Corporation
A.
B.
C.
D.
E.
Yellow - 12 Volts Constant Power
Black - Chassis Ground
Power Harness
Red - 12 Volts Accessory Power
Orange - Illumination