Owner's Manual

120 71-012
Speaker Wiring Adaptors
Revision 1 0/06/94
12071012
Note: Front door speaker connector may be taped (with blue tape) to the door
Attach to speakers (Fig. 1 ). wire harness behind the factory mounting bracket.
Rear deck speaker connector
may be taped (with blue tape) to the trunk harness.
White-
positive(+)
Note: If slip-on connectors do not fit your speakers (Fig. 1 ), cut them
off and solder (or splice) to the harness supplied with speakers (Fig. 2).
Alternate Connection Method:
How to connect wires:
•Tape
Tools required:
Isolate and individuatty tape off the
ends
of any unused wires to prevent
electrical short
circuit
CRUTCHFIELD
Copyright 1994 Crutchfield Corporation
soldering iron
solder
(Rosin Core suggested.)
electrical tape