User Manual

ManualsBrandsMetra ManualsAutomotiveMetra 95-2005B Double DIN Installation Dash Kit for Select 1996-Up Cadillac Vehicles (Black)

APPLICATIONS

METRA. The World’s best kits.

™

metraonline.com1-800-221-0932

REV. 7/3/2014 INST95-2005B

CAUTION: Metra recommends disconnecting the

negative battery terminal before beginning any

installation. All accessories, switches, and especially

air bag indicator lights must be plugged in before

reconnecting the battery or cycling the ignition.

NOTE: Refer to the instructions included with the

aftermarket radio.

INSTALLATION INSTRUCTIONS FOR PART 95-2005B

• Double DIN radio provision

• A) Double DIN housing • B) Double DIN brackets

KIT FEATURES

KIT COMPONENTS

WIRING & ANTENNA CONNECTIONS (sold separately)

Wiring Harness:

• GMRC-03

• GMOS-06

Antenna Adapter:

• 40-GM10

• Small flat blade screwdriver/Panel removal tool

• Phillips screwdriver • Socket set • Cutting tool

TOOLS REQUIRED

Cadillac 1996-2005

95-2005B

See application list inside

A B

Summary of content (16 pages)

PAGE 1
INSTALLATION INSTRUCTIONS FOR PART 95-2005B APPLICATIONS See application list inside Cadillac 1996-2005 95-2005B KIT FEATURES • Double DIN radio provision WIRING & ANTENNA CONNECTIONS (sold separately) Wiring Harness: • GMRC-03 • GMOS-06 Antenna Adapter: • 40-GM10 TOOLS REQUIRED • Small flat blade screwdriver/Panel removal tool • Phillips screwdriver • Socket set • Cutting tool REV.
PAGE 2
95-2005B Dash Disassembly 95-2005B Table of Contents Cadillac Eldorado 1996-2002/Seville 1996-1997 Dash Disassembly – Cadillac Eldorado 1996-2002 ............................................. 2-3 – Cadillac Seville 1996-1997 ................................................ 2-3 – Cadillac Seville 1998-2005 ................................................ 3-4 – Cadillac Deville (console shift) 1996-1999 ............................ 3-4 – Cadillac Deville (DHS, DTS) 2000-2005 ..............................
PAGE 3
Dash Disassembly 95-2005B Cadillac Eldorado 1996-2002/Seville 1996-1997 4. Remove (4) 9/32 screws: • (2) from the top (Figure D) and • (2) from the bottom to remove radio. Cadillac Seville 1998-2005/ Deville (console shift) 1996-1999 1. Remove (2) 9/32 screws on each side of the ashtray assembly and (1) in the middle underneath ashtray insert. (Figure A) 5. Remove the (2) retaining nuts securing the radio and climate control to the factory bracket assembly and slide the climate control outward.
PAGE 4
95-2005B Cadillac Seville 1998-2005/Deville (console shift) 1996-1999 4. Remove (3) 9/32 screws: • (1) From the top (Figure C) and • (2) From the bottom to remove radio. (Figure D) 1. Unsnap and remove panel surrounding climate controls and radio. (Figure A) 5. Remove the (2) retaining nuts securing the radio and climate control to the factory bracket assembly and slide the climate control outward. (Figure E) Continue to kit assembly 2. Depress clips on both sides of radio and pull out to remove.
PAGE 5
Kit Preparation 95-2005B Cadillac Eldorado 1996-2002/Seville 1996-1997 1. Cadillac Eldorado 1996-2002/Seville 1996-1997: Remove all tabs except the ones marked S-E from the radio housing. (Figure A) 2. Cut front tab from bottom of the double DIN armature on both sides. (Figure B) 3. Attach the double DIN brackets to the double DIN radio housing. (Figure C) 4. Slide the climate control assembly into the bracket/housing assembly and attach with the factory hardware.
PAGE 6
Kit Preparation 95-2005B Cadillac Seville 1998-2005/Deville (console shift) 1996-1999 1. Cadillac Seville 1998-2005/Deville (console shift) 1996-1999: Remove all tabs except the ones marked 98-05S from the radio housing. (Figure A) 2. Cut rear tab from bottom of the double DIN armature on both sides. (Figure B) 3. Attach the double DIN brackets to the double DIN radio housing. (Figure C) 4. Slide the climate control assembly into the bracket/housing assembly and attach with the factory hardware.
PAGE 7
Kit Preparation 95-2005B Cadillac Deville (DHS, DTS) 2000-2005 1. Cadillac Deville (DHS, DTS) 2000-2005: Remove all tabs from the radio housing top. (Figure A) 2. Attach the double DIN brackets to radio housing. Leave all side tabs on the double DIN brackets attached, but cut plastic armature off below on each bracket at bottom, both sides. (Figure B) 3. When installing the 95-2005 assembly into the sub dash use the supplied (4) Phillips screws and mount in the locations shown.
PAGE 8
INSTALLATION INSTRUCTIONS FOR PART 95-2005B Kit Assembly 95-2005B Double DIN radio provision 1. Slide the radio into the bracket/radio housing assembly and secure radio to the assembly using the screws supplied. (Figure A) REV. 7/3/2014 INST95-2005B 2. Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Re-connect the negative battery terminal and test the unit for proper operation. 3. Reassemble dash in reverse order of disassembly.
PAGE 9
INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 95-2005B APLICACIONES Ver el interior de la cubierta delantera Cadillac 1996-2005 95-2005B CARACTERÍSTICAS DEL KIT • Provisión de radio doble DIN HERRAMIENTAS REQUERIDAS • Destornillador de paleta pequeño/herramienta de remoción de panel • Destornillador Phillips • Juego de dados • Herramienta de corte REV.
PAGE 10
95-2005B Desmontaje del tablero 95-2005B Indice Cadillac Eldorado 1996-2002/Seville 1996-1997 Desmontaje del tablero – Cadillac Eldorado 1996-2002 ............................................. 2-3 – Cadillac Seville 1996-1997 ................................................ 2-3 – Cadillac Seville 1998-2005 ................................................ 3-4 – Cadillac Deville (palanca de velocidades en consola) 1996-1999 ........................................................................
PAGE 11
Desmontaje del tablero 95-2005B Cadillac Eldorado 1996-2002/Seville 1996-1997 4. Quite (4) tornillos de 9/32: • (2) de la parte superior y • (2) de la parte inferior para quitar el radio. Cadillac Seville 1998-2005/Deville (palanca de velocidades en consola) 1996-1999 1. Quite los (2) tornillos 9/32 a cada lado del ensamble del cenicero y (1) en el centro, debajo del inserto del cenicero. (Figura A) 5.
PAGE 12
95-2005B Cadillac Seville 1998-2005/Deville (palanca de velocidades en consola) 1996-1999 4. Quite (3) tornillos de 9/32: • (1) de la parte superior y • (2) de la parte inferior para quitar el radio. (Figura D) 1. Desenganche y quite el panel que rodea los controles del clima y el radio. (Figura A) 5. Quite las (2) tuercas de retención que sujetan el radio y el control de clima al ensamble del soporte de fábrica y deslice el control de clima hacia fuera. (Figura E) 2.
PAGE 13
Preparación del kit 95-2005B Cadillac Eldorado 1996-2002/Seville 1996-1997 1. Cadillac Eldorado 1996-2002/Seville 1996-1997: Quite todas las pestañas, excepto las marcadas S-E de la carcasa del radio. (Figura A) 2. Corte la pestaña delantera de la parte inferior de la armadura doble DIN en ambos lados. (Figura B) 3. Una los soportes correspondientes doble DIN a la carcasa del radio doble DIN. (Figura C) 4.
PAGE 14
Preparación del kit 95-2005B Cadillac Seville 1998-2005/Deville 1. Cadillac Seville 1998-2005/Deville (palanca de velocidades en consola) 1996-1999: Quite todas las pestañas, excepto las marcadas 98-05S de la carcasa del radio. (Figura A) 2. Corte la pestaña trasera de la parte inferior de la armadura doble DIN en ambos lados. (Figura B) 3. Una los soportes correspondientes doble DIN a la carcasa del radio doble DIN. (Figura C) 4.
PAGE 15
Preparación del kit 95-2005B Cadillac Deville (DHS, DTS) 2000-2005 1. Cadillac Deville (DHS, DTS) 2000-2005: Quite todas las pestañas de la parte superior de la carcasa del radio. (Figura A) 2. Una los soportes correspondientes doble DIN a la carcasa del radio. Deje todas las pestañas laterales en los soportes doble DIN unidos, pero corte la armadura de plástico de abajo en cada soporte en la parte inferior, en ambos lados. (Figura B) 3.
PAGE 16
INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 95-2005B Ensamble del kit 95-2005B Provisión de radio doble DIN 1. Deslice el radio dentro del ensamble del soporte/radio y sujételo al ensamble con los tornillos suministrados. (Figura A) REV. 7/3/2014 INST95-2005B 2. Ubique el arnés de cableado de fábrica en el tablero. Metra recomienda el uso de un adaptador adecuado de acoplamiento de Metra o de AXXESS.