User Manual

25
Kit Assembly 95-2009
1. SnaptheDoubleDINbracketstotheedgeoftheDoubleDINtrimplate.
(FigureA)
2. SlidetheDoubleDINheadunitorstackedISOheadunitsintothebracket/radio
housingassemblyandsecuretheDoubleDINheadunitorstackedISOhead
unitstotheassemblyusingthescrewssuppliedwiththeradio.(FigureB)
 Note: For the Buick LeSabre, Oldsmobile Aurora, and the Pontiac Bonneville the
(3) speed clips and screws provided with the kit will need to be installed into
the sub dash where the screw holes line up on the kit.
3. Locatethefactorywiringharnessinthedash.Metrarecommendsusingthe
propermatingadapterfromMetraorAXXESS.Re-connectthenegativebattery
terminalandtesttheunitforproperoperation.
4. Reassembledashinreverseorderofdisassembly.
Double DIN radio/Stacked ISO
mount unit provision
(Figure B)(Figure A)