User Manual

29
Kit Assembly 99-2009
1. Cutradiohousingsupportbarsandremove.
(FigureA)
2. Slidetheradiohousingbracketsontothepocket
andsecurewiththesupplied(2)#83/8”screws.
(FigureB)
3. MounttheISOBracketstotheheadunitwiththe
screwssuppliedwiththeunit.(FigureC)
4. Slidetheheadunitintotheradioopeninguntilthe
sideclipsengage.(FigureD)
5. SnapthetrimplateintothesingleDINradio
housing.(FigureD)
 Note: For the Buick LeSabre, Oldsmobile Aurora
and the Pontiac Bonneville the (3) speed clips
and screws provided with the kit will need to be
installed into the sub dash where the screw holes
line up on the kit.
6. Locatethefactorywiringharnessinthedash.
Metrarecommendsusingthepropermating
adapterfromMetraorAXXESS.Re-connectthe
negativebatteryterminalandtesttheunitfor
properoperation.
7. Reassembledashinreverseorder
ofdisassembly.
ISO mount radio provision with pocket
(Figure B)(Figure A) (Figure C)
(Figure D)