User Manual

ManualsBrandsMetra ManualsCar Electronics & GPSDash Kit for Select 2018 Chevrolet Equinox Vehicles - Matte Black

CAUTION!

All accessories, switches, climate

controls panels, and especially air bag indicator

lights must be connected before cycling the

ignition. Also, do not remove the factory radio

with the key in the on position, or while the

vehicle is running.

Metra. The World’s Best Kits.

INSTALLATION INSTRUCTIONS

95-3022B

KIT FEATURES

• ISO DDIN radio provision

• Painted matte black

KIT COMPONENTS

• A) Front radio housing • B) Rear radio housing • C) Radio brackets • D) (6) #8 x 3/8” Phillips screws

TOOLS REQUIRED

• Panel removal tool • Phillips screwdriver

• 9/32” socket wrench

TABLE OF CONTENTS

Dash Disassembly ..................................................2

Kit Assembly

–ISO DDIN radio provision .....................................3

WIRING & ANTENNA CONNECTIONS

(sold separately)

Wiring Harness: • GMOS-LAN-10 (IOB radio)

• GMOS-LAN-09 (IO5 radio)

Antenna Adapter: 40-EU55

A B C D

Chevrolet Equinox 2018-up*

*Visit MetraOnline.com for up-to-date vehicle speciﬁc applications.

Summary of content (4 pages)

PAGE 1
95-3022B I N S TA L L AT I O N I N S T R U C T I O N S Chevrolet Equinox 2018-up* *Visit MetraOnline.com for up-to-date vehicle specific applications.
PAGE 2
DASH DISASSEMBLY 1. Unclip the top of the steering column, then unclip and remove the instrument cluster trim. (Figure A) 4. Inside a small cavity located behind the climate control panel, remove (2) 9/32” screws facing up that are securing the radio assembly to the dash. (Figure D) 2. Remove (1) 9/32” screw securing the dash trim by the instrument cluster, then unclip and remove the trim. (Figure B) 3. Remove (4) 9/32” screws from the climate control panel, then unclip, unplug, and remove the panel.
PAGE 3
KIT ASSEMBLY ISO DDIN radio provision 1. Secure the radio brackets to the radio using the screws supplied with the radio. (Figure A) 2. Insert the completed assembly between the front radio housing, and the rear radio housing, then secure the entire assembly together with the (6) #8 x 3/8” Phillips screws provided. Then attach the (3) factory clips removed in Dash Disassembly onto the assembly (Figure B) 3.
PAGE 4
95-3022B I N S TA L L AT I O N I N S T R U C T I O N S IMPORTANT If you are having difficulties with the installation of this product, please call our Tech Support line at 1-800-253-TECH. Before doing so, look over the instructions a second time, and make sure the installation was performed exactly as the instructions are stated. Please have the vehicle apart and ready to perform troubleshooting steps before calling.