Installation instructions

ManualsBrandsMetra ManualsMobile Phones95-3303B

APPLICATIONS

METRA. The World’s best kits.

™

metraonline.com1-800-221-0932

REV. 12/16/2013 INST95-3303B

CAUTION: Metra recommends disconnecting the

negative battery terminal before beginning any

installation. All accessories, switches, and especially

air bag indicator lights must be plugged in before

reconnecting the battery or cycling the ignition.

NOTE: Refer to the instructions included with the

aftermarket radio.

Table of Contents

INSTALLATION INSTRUCTIONS FOR PART 95-3303B

• Double DIN radio provision

• Painted matte black

• A) Radio Housing • B) Brackets • C) Display Pod • D) Harness (not shown)

KIT FEATURES

KIT COMPONENTS

WIRING & ANTENNA CONNECTIONS (sold separately)

Wiring Harness: • Included

Antenna Adapter: • 40-GM10 - GM antenna adapter 1988-up

• Panel removal tool • Phillips screwdriver

• Socket Wrench

TOOLS REQUIRED

Chevrolet:

Malibu/Malibu Maxx 2004-2007,

Malibu Classic 2008, Cobalt* 2005-2006

Pontiac G6** 2005-2009

95-3303B

B C

Dash Disassembly

– Chevrolet Malibu 2004-2007............................. 2-3

– Chevrolet Malibu Classic 2008 ..........................2-3

– Chevrolet Cobalt** 2005-2006 ............................. 4

– Pontiac G6* 2006-2009 ....................................... 5

Kit Assembly

– Double DIN radio provision ................................6-7

*This kit is only needed for OnStar retention.

**In 2009, only use this kit for models where the

5th digit of the VIN is a G, H or M.

Summary of content (16 pages)

PAGE 1
INSTALLATION INSTRUCTIONS FOR PART 95-3303B APPLICATIONS REV. 12/16/2013 INST95-3303B Chevrolet: Malibu/Malibu Maxx 2004-2007, Malibu Classic 2008, Cobalt* 2005-2006 Pontiac G6** 2005-2009 95-3303B Table of Contents Dash Disassembly – Chevrolet Malibu 2004-2007.............................2-3 – Chevrolet Malibu Classic 2008 ..........................2-3 – Chevrolet Cobalt** 2005-2006 ............................. 4 – Pontiac G6* 2006-2009 .......................................
PAGE 2
95-3303B Dash Disassembly Chevrolet Malibu 2004-2007, Chevrolet Malibu Classic 2008 3. Remove (2) 7 mm screws from bottom edge of panel below steering wheel. Unclip panel and let hang. It is not necessary to completely remove panel. (Figure C) 1. Unclip and remove wood grain/ painted trim pieces from both sides of steering wheel. (Figure A) 2. Unclip and remove side panel from driver’s side of dash with door open and remove (2) 7 mm screws. (Figure B) 4.
PAGE 3
95-3303B Dash Disassembly Chevrolet Malibu 2004-2007, Chevrolet Malibu Classic 2008 cont. 7. Unclip and remove trim panel surrounding radio and climate controls. (Figure G) 5. Unclip and remove side panel from passenger side of dash with door open and remove (2) 7 mm screws from behind panel. (Figure E) 6. Remove (2) 7 mm screws from bottom of glove box then open box and squeeze sides together to open further and remove the remaining (4) 7 mm screws.
PAGE 4
95-3303B Dash Disassembly 4. Unclip and remove trim panel surrounding radio and climate controls. (Figure D) Chevrolet Cobalt* 2005-2006 1. Unclip and remove trim panel from above glove box. (Figure A) 2. Unclip upper edge of panel below steering column and let hang. Not necessary to remove completely. (Figure B) 5. Remove (4) 9/32” screws securing radio. (Figure E) Continue to kit assembly (Figure A) 3. Unclip and remove small trim panel to right of ignition switch.
PAGE 5
95-3303B Dash Disassembly 3. Unclip and remove center panel surrounding radio and A/C controls. (Figure C) Pontiac G6** 2005-2009 1. Open glove box and remove (6) screws from outer edge then unclip and remove box. (Figure A) 4. Remove (4) screws and extract radio from sub dash. (Figure D) 2. Remove (4) screws from panel below steering column and unclip and remove panel.
PAGE 6
95-3303B Kit Assembly ISO DDIN radio provision Wiring the 95-3303B 1. Slide the appropriate bracket into the trim plate aligning the holes in the trim plate to the clips on the bracket. (Figure A) 1. Make wiring connections using the Metra/EIA Wiring Code chart, shown below, and the instructions included with the radio. 2. Slide the DDIN radio into the trim plate bracket assembly and secure the unit to the kit using the screws supplied with the radio. (Figure B) Metra/EIA Wiring Code (Figure A) 3.
PAGE 7
95-3303B Operation of the 95-3303B Setting and Adjustment mode There is a Settings and Adjustments mode available for the individualized adjustment of the contrast of the display, brightness of the display and backlighting, OnStar volume, and the button backlighting color. Table 1.0 Function Entering the Settings and Adjustments mode To enter the Settings and Adjustments mode, press the INFO and MENU buttons simultaneously.
PAGE 8
INSTALLATION INSTRUCTIONS FOR PART 95-3303B KNOWLEDGE IS POWER REV. 12/16/2013 INST95-3303B Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow. Metra recommends MECP certified technicians METRA. The World’s best kits.™ 1-800-221-0932 metraonline.
PAGE 9
INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 95-3303B AplicAciones REV. 12/16/2013 INST95-3303B Chevrolet: Malibu/Malibu Maxx 2004-2007, Malibu Classic 2008, Cobalt* 2005-2006 Pontiac G6** 2005-2009 95-3303B Indice Desmontaje del tablero – Chevrolet Malibu 2004-2007.............................2-3 – Chevrolet Malibu Classic 2008 ..........................2-3 – Chevrolet Cobalt** 2005-2006 ............................. 4 – Pontiac G6* 2006-2009 .......................................
PAGE 10
95-3303B Desmontaje del tablero 3. Retire los (2) tornillos de 7 mm del borde inferior del panel debajo del volante. Desenganche el panel y déjelo colgando. No es necesario retirar el panel por completo. (Figura C) Chevrolet Malibu 2004-2007, Chevrolet Malibu Classic 2008 1. Desenganche y retire las piezas de moldura de veta de madera/ pintadas de ambos lados del volante. (Figura A) 2.
PAGE 11
95-3303B Chevrolet Malibu 2004-2007, Chevrolet Malibu Classic 2008 cont. 7. Desenganche y retire el panel de moldura que rodea el radio y los controles del clima. (Figura G) 5. Desenganche y retire el panel lateral del lado del conductor del tablero con la puerta abierta y retire los (2) tornillos de 7 mm detrás del panel. (Figura E) 6.
PAGE 12
95-3303B Desmontaje del tablero 4. Desenganche y retire el panel de moldura que rodea el radio y los controles del clima. (Figura D) Chevrolet Cobalt* 2005-2006 1. Desenganche y retire el panel de la moldura de arriba de la guantera. (Figura A) 2. Desenganche el borde superior del panel debajo de la columna de dirección y déjelo colgando. No es necesario retirar el panel por completo. (Figura B) 5. Retire los (4) tornillos de 9/32” que sostienen el radio. (Figura E) Continúe con el ensamble del kit.
PAGE 13
95-3303B Desmontaje del tablero 3. Suelte y retire el panel central que rodea el radio y los controles del aire acondicionado. (Figura C) Pontiac G6** 2005-2009 1. Abra la guantera y retire los (6) tornillos del borde exterior, luego desenganche y retire la guantera. (Figura A) 4. Quite los (4) tornillos y extraiga el radio del sub tablero. (Figura D) 2. Retire los (4) tornillos del panel debajo de la columna de dirección y desenganche y retire el panel. (Figura B) Continúe con el ensamble del kit.
PAGE 14
95-3303B Ensamble del kit Provisión de unidad central ISO DDIN. 1. Deslice el soporte correspondiente en la placa de la moldura, alineando los orificios de la placa con los ganchos del soporte. (Figura A) 2. Deslice el radio DDIN en el ensamble del soporte de la placa de la moldura y sujete la unidad al kit con los tornillos suministrados con el radio. (Figura B) 3. Solo Cobalt: Corte y retire las pestañas de montaje superior a cada lado de la carcasa del radio. (Figura C) Cableado del 95-3303B 1.
PAGE 15
95-3303B Operación del 95-3303B Modo de configuración y ajustes Hay un modo de configuración y ajustes disponible, asequible para el ajuste individualizado del contraste, brillo y retroiluminación de la pantalla, volumen de OnStar y el color de retroiluminación de los botones. Tabla 1.0 Cómo entrar al modo de configuración y ajustes Para entrar al modo de configuración y ajustes, presione al mismo tiempo los botones INFO y MENU.
PAGE 16
INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 95-3303B EL CONOCIMIENTO ESOWER PODER K NOWLEDGE IS P Mejore sus habilidades de instalación y fabricación REV. 12/16/2013 INST95-3303B Enhance your installation and fabrication skills by enrolling in the en most recognized and respected inscribiéndose la escuela de dispositivos electrónicos mobile school in our industry. móvileselectronics más reconocida y respetada de nuestra industria. Log onto www.installerinstitute.com or call Regístrese en www.