User Manual

ManualsBrandsMetra ManualsAutomotiveMetra 95-3304 Double DIN Installation Kit for Select 2005-2006 GM/Chevrolet Vehicles (Black)

INSTALLATION INSTRUCTIONS FOR PART 95-3304 or 99-3304

ApplicAtions

METRA. The World’s best kits.

™

metraonline.com1-800-221-0932

REV. 11/1/2013 INST-3304

CAUTION: Metra recommends disconnecting the

negative battery terminal before beginning any

installation. All accessories, switches, and especially

air bag indicator lights must be plugged in before

reconnecting the battery or cycling the ignition.

NOTE: Refer to the instructions included with the

aftermarket radio.

WiRinG & AntEnnA connEctions (sold separately)

Wiring Harness:

•GMOS-01-GMOnStar&chimeharness2002-up

•GMOS-04-GMOnStar&chimeandampharness

 2002-up

Antenna Adapter:

•40-GM10-GMantennaadapter1988-up

•Panelremovaltool•Phillipsscrewdriver

•Socketwrench

tools REQUiRED

Buick/Chevy/Hummer/Pontiac/

Saturn multi-kit 2005-2013

95-3304 or 99-3304

See application list inside

95-3304:

•DoubleDINradioprovision

•StackedISODINradioprovision

99-3304:

•DINradioprovisionwithpocket

•ISO DINradioprovisionwithpocket

95-3304: •A1)Trimplate•B1)ISObrackets

99-3304: •A2)Radiohousing•B2)ISObrackets

•C2)Trimplate

Kit FEAtUREs

Kit coMponEnts

A2B1A1 B2 C2

Summary of content (16 pages)

PAGE 1
INSTALLATION INSTRUCTIONS FOR PART 95-3304 or 99-3304 ApplicAtions See application list inside WiRinG & AntEnnA connEctions (sold separately) Wiring Harness: • GMOS-01 - GM OnStar & chime harness 2002-up • GMOS-04 - GM OnStar & chime and amp harness 2002-up Antenna Adapter: • 40-GM10 - GM antenna adapter 1988-up Buick/Chevy/Hummer/Pontiac/ Saturn multi-kit 2005-2013 95-3304 or 99-3304 Kit FEAtUREs 95-3304: • Double DIN radio provision • Stacked ISO DIN radio provision tools REQUiRED • Panel removal tool
PAGE 2
Applications Buick Terraza ..................................................... 2005-2008 Chevrolet Corvette ................................................... 2005-2013 Uplander ................................................... 2005-2008 Hummer H3 ............................................................ 2006-2010 Table of Contents Dash Disassembly - Buick Terraza 2005-2008 ....................................... 2 - Chevrolet Corvette 2005-2013 ...............................
PAGE 3
Dash Disassembly Chevrolet Corvette 2005-2013 1. Unclip and remove ride control switch/blank plate at front edge of center console lid. (Figure A) 2. Remove (2) 9/32” screws from under the removed blank plate. (Figure B) 3. Unclip and remove entire panel Hummer H3 2006-2013 1. Unclip and remove trim panel around radio and A/C controls. (Figure A) surrounding radio and including A/C controls. (Figure C) 4. Remove (4) 9/32” screws securing radio to extract from sub dash. (Figure D) 2.
PAGE 4
Kit Assembly 95-3304 Double DIN radio provision Stacked ISO DIN radio provision 1. Slide the appropriate bracket into the trim plate aligning the holes in the trim plate to the clips on the bracket. (Figure A) 1. Slide the appropriate bracket into the trim plate aligning the holes in the trim plate to the clips on the bracket. (Figure A) 2. Slide the DDIN radio unit into the trim plate bracket assembly and secure the unit to the kit using the screws supplied with the head unit. (Figure B) 2.
PAGE 5
Kit Assembly 99-3304 DIN radio provision with pocket ISO DIN radio provision with pocket 1. Slide the DIN cage into the radio housing and secure by bending the metal locking tabs down. (Figure A) 1. Mount the ISO brackets to the head unit with the screws supplied with the unit. (Figure A) 2. Slide the head unit into the radio opening until the side clips engage. (Figure B) 2. Slide the aftermarket head unit into the cage and secure. (Figure B) 3. Locate the factory wiring harness in the dash.
PAGE 6
Notes
PAGE 7
Notes
PAGE 8
INSTALLATION INSTRUCTIONS FOR PART 95-3304 or 99-3304 KNOWLEDGE IS POWER REV. 11/1/2013 INST-3304 Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow. Metra recommends MECP certified technicians METRA. The World’s best kits.™ 1-800-221-0932 metraonline.
PAGE 9
INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 95-3304 o 99-3304 APLICACIONES Interior lista de aplicaciones CABLEADO Y CONEXIONES DE ANTENA (se venden por separado) Arnés de cableado: • GMOS-01 - GM OnStar y arnés de tonos 2002 y más • GMOS-04 - GM OnStar y arnés de tonos y amplificador 2002 y más Adaptador de antena: • 40-GM10 - Adaptador de antena GM 1988 y más Buick/Chevy/Hummer/Pontiac/ Saturn multi-kit 2005-2013 95-3304 or 99-3304 CArACTEríSTICAS DEL kIT 95-3304: • Provisión de radio doble DIN • Provisi
PAGE 10
Aplicaciones Buick Terraza ..................................................... 2005-2008 Chevrolet Corvette ................................................... 2005-2013 Uplander ................................................... 2005-2008 Hummer H3 ............................................................ 2006-2010 Índice Desmontaje del tablero - Buick Terraza 2005-2008 ....................................... 2 - Chevrolet Corvette 2005-2013 ...............................
PAGE 11
Desmontaje del tablero Chevrolet Corvette 2005-2013 1. Suelte y retire el interruptor de control de movimiento/la placa decorativa del borde frontal de la tapa de la consola central. (Figura A) Hummer H3 2006-2013 1. Suelte y retire el panel de recorte alrededor de la radio y los controles del clima. (Figura A) rodea el radio y que incluye los controles del aire acondicionado. (Figura C) 2. Retire los (2) tornillos de 9/32” de debajo de la placa que retiró. (Figura B) 4.
PAGE 12
Ensamble del kit 95-3304 Provisión de radio doble DIN Provisión de radio ISO DIN vertical 1. Deslice el soporte correspondiente en la placa de la moldura, alineando los orificios de la placa con los ganchos del soporte. (Figura A) 1. Deslice el soporte correspondiente en la placa de la moldura, alineando los orificios de la placa con los ganchos del soporte. (Figura A) 2.
PAGE 13
Ensamble del kit 99-3304 Provisión de radio DIN con bolsillo Provisión de radio ISO DIN con bolsillo 1. Deslice la jaula DIN en la caja de radio y asegurar doblando las lengüetas de fijación de metal hacia abajo. (Figura A) 1. Monte los soportes ISO a la unidad principal con los tornillos suministrados con la unidad. (Figura A) 2. Deslice la unidad principal del mercado de accesorios en la jaula y seguro. (Figura B) 2.
PAGE 14
Notas
PAGE 15
Notas
PAGE 16
INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 95-3304 o 99-3304 EL CONOCIMIENTO ES PODER sus habilidades deIS instalación y KMejore NOWLEDGE POWER REV. 11/1/2013 INST-3304 Enhance your installation and fabrication skills by fabricación inscribiéndose en la escuela de enrolling in the most recognized and respected dispositivos electrónicos móviles más reconocida mobile electronics school in our industry. y respetada de nuestra industria. en Log onto www.installerinstitute.