User Manual

95-3318B
7
Personalization Menu and Climate Control Status
Personalization Menu
Note: The steering wheel controls for the personalization menu will override the
controls for the radio, and the Push-to-Talk (OnStar) button on the steering wheel
control will be disabled.
Note: If installing an ASWC-1 (sold separately), the PTT (OnStar) button on the
steering wheel cannot be programmed for Dual Assignment.
• Press and hold the Push-to-Talk (PTT) button on the steering wheel for 3-5
seconds to enter the personalization screen. The climate control screen will appear
first; press Push-to-Talk (PTT) one more time to enter the personalization menu
.
Note:
The menu has a 5-7 timeout feature. With no interaction, the menu will
revert back to the radio, and the procedure will need to be repeated.
• To navigate through the menu, you will continue to use the steering wheel
control buttons. Touch points are not available in this menu, as well as with the
comfort controls.
• The controls are as follows:
Volume Up = Up
Volume Down = Down
Source (SRC) = Enter
Mute/Hang up = Back or Return
Seek Up and Seek Down = Not used
Climate Control Status
• The use of the factory controls will interrupt the visual screen on the radio,
and show the status of the changes being made instead.
Note: For some aftermarket radios, there is a delay switching to the
“Rearview Camera Input”.
Note: This menu has a timeout feature; after 5 seconds of no climate control
use, the visual will return back to the radio.
ATTENTION: The Rearview Camera Input is used to display the Personalization Menu and the Climate Control Status. If the aftermarket radio does not have a screen with a
Rearview Camera Input, then there will be no visualization of the Climate Controls Status or Personalization Menu. An externally mounted screen could be substituted in this
situation. If there is no visual, please go back and check the wiring and settings in the radio.