Owner's Manual

99-5812
9
DIN radio provision with pocket
1.
(a) For the Ford Econoline 2009-
up, Edge 2007-2010, Expedition
2007-2014, Expedition (fleet) 2015,
Explorer & Explorer Sport Trac
2006-2010, F-650/750 2011-up,
F-250/350/450/550 2008-2016,
F-150 2004-2008, Fusion 2006-2009,
Transit Connect 2012-2013 / Lincoln
Mark LT 2006-2008, MKX (with
NAV) 2007-2010, Navigator (with
NAV) 2007-2014 / Mercury Milan
2006-2009, Mountaineer 2006-2010
,
attach the spacers to the mounting
tabs on radio housing B. Use the (4)
screws provided to secure the radio
housing to the vehicle. (Figure A)
(b) For the Ford F-250/350/450/
550 2005-2007, Focus 2005-
2007, Freestar 2004-2007,
Monterey 2004-2007, slide the
side brackets onto the sides of
radio housing B. (Figure B)
(c) If your vehicle is not listed in
steps (a) or (b), proceed to Step 2.
2. Remove the metal DIN sleeve from
the aftermarket radio.
3. Slide the sleeve into radio housing
B and secure by bending the metal
locking tabs outward. (Figure C)
4. Slide the radio into the sleeve until
it snaps in place. (Figure D)
5. Locate the factory wiring harness
and antenna connection in the
dash. Metra recommends using
the proper mating adapter from
Metra or AXXESS. Test the radio for
proper operation.
6. Reassemble the dash in reverse
order of disassembly.
Kit Assembly
(Figure A)
(Figure B)
(Figure C)
(Figure D)