INSTALLATION INSTRUCTIONS FOR PART 95-5812 APPLICATIONS See application list inside Ford multi-kit 2004-up 95-5812 KIT FEATURES • Double DIN radio provision • Stacked ISO units provision KIT COMPONENTS • A) Radio Housing (DDIN & stacked ISO DIN) • B) Double DIN Brackets • C) Spacers • D) (4) Screws A C B D WIRING & ANTENNA CONNECTIONS (Sold Separately) Wiring Harness: • 70-5520 Ford harness 2003-up • 70-5521 Ford amplified harness 2003-up • 70-5522 Ford sub harness 2003-up • XSVI-5520 NAV Ford inter
95-5812 Applications Ford Edge 2007-2010 F-150 2004-2008/Expedition 2007-up Mustang 2005-2009 Five Hundred 2005-2007 Taurus 2008-2009 Fusion 2006-2009 Freestyle 2005-2007 Taurus X 2008-2009 Freestar 2004-2007 Focus 2005-2007 Explorer 2006-2010 Explorer Sport Trac 2006-2010 E Series 2009-up F Series Super Duty 2005-2007 Super Duty 2008-Up Mercury Sable 2008-2009 Montego 2005-2007 Milan 2006-2009 Monterey 2004-2007 Mountaineer 2006-2010 Lincoln Mark LT 2005-2008 MKX 2007-2010 Navigator 2007-up Caution Met
95-5812 Table of Contents Dash Disassembly - Ford Edge 2007-2010.........................................................................................................1 - Ford F-150 2004-2008/Expedition 2007-up........................................................................1 - Ford Lincoln Mark LT 2005-2009........................................................................................1 - Ford Mustang 2005-2009...............................................................................
95-5812 Dash Disassembly Ford F-150 2004-2008 Lincoln Mark LT 2005-2008 Ford Expedition 2007-Up Ford Edge 2007-2010 1. Using the Metra 86-5618 removal keys, slide the radio out of the radio cavity. Unplug and remove the radio. (Figure A) 2. Cut and remove obstructions in dash cavity.
95-5812 Ford Mustang 2005-2009 1. Disconnect the negative battery terminal to prevent an accidental short circuit. 2. Remove the small rectangular shifter lever trim panel if equipped. (Figure A) 3. Remove (2) Phillips screws from under the center armrest at the back of the shifter trim panel (including cup holders). (Figure B) (Figure A) 4. Unclip and remove panel. (Figure B) 5. Unclip and remove the (2) center stack trim panels from the left and right side of the radio and climate controls.
95-5812 Ford Five-Hundred 2005-07, Ford Taurus 2008-09 Mercury Montego 2005-07, Mercury Sable 2008-09 1. Unclip and remove the small rectangular trim around shift lever. (Figure A) 2. Unclip and remove the entire panel (including cup holders) surrounding the shift lever. (Figure B) 3. Remove (2) 9/32” screws at the bottom of the center radio/ climate control panel. (Figure C) (Figure A) 4. Unclip and remove the center panel. (Figure D) 5. Remove (4) 9/32” screws from the radio to remove.
95-5812 Ford Fusion 2006-2009 Mercury Milan 2006-2009 1. Unsnap and remove entire panel surrounding the radio and climate controls. (Figure A) 2. Remove (4) 9/32” screws to remove the factory radio.
95-5812 Ford Freestyle 2005-2007 Ford Taurus X 2008-09 1. Unclip and remove entire panel surrounding the radio and a/c controls. (Figure A) 2. Remove (4) 9/32” screws from radio to remove.
5-5812 Ford Freestar 2004-2007 Mercury Monterey 2004-2007 1. Unsnap and remove entire panel surrounding the radio and climate controls. (Figure A) 2. Remove (4) 9/32” screws to remove the factory radio.
95-5812 Ford Focus 2005-2007 1. Unsnap and remove entire panel surrounding the radio and climate controls. (Figure A) 2. Remove (4) 9/32” screws to remove the factory radio.
95-5812 Ford Explorer 2006-2010 Ford Sport Trac 2006-2010 Mercury Mountaineer 2006-2010 1. Open center console and remove (2) Phillips screws then unclip and remove entire panel surrounding shifter.(Figure A) 2. Remove (4) 9/32” screws to remove the factory radio. (Figure B) 3. Remove (4) 9/32” screws to remove the factory radio.
95-5812 Ford E Series 2009-Up Ford F Series Super Duty 2005-Up 1. Unsnap and remove entire panel surrounding the radio and climate controls. (Figure A) 2. Remove (4) 9/32” screws to remove the factory radio.
95-5812 Ford Super Duty 2008-Up 1. Unclip and remove the power outlet panel and the blank panel on the left and right side of the radio trim panel. (Figure A) 2. Remove the (2) 9/32” screws exposed behind the two panels remove in step 2. 3. Unclip and remove the entire radio trim panel including the a/c control and vents. (Figure A) 4. Remove (4) 9/32” screws securing the radio.
95-5812 Lincoln MKX 2007-2010 (Factory Navigation Models Only) 1. Open center console lid and unclip and remove the center console trim panel surrounding the shifter. (Figure A) 2. Remove (2) Phillips screws from the storage bin then unclip and remove the bin. (Figure B) 3. Unclip and remove the upper and lower center trim panel as one assembly. (Figure C) (Figure A) 4. Remove (4) 9/32” screws securing the radio. Unplug and remove the Radio.
95-5812 Lincoln Navigator 2007-Up (Factory Navigation Models Only) 1. Unclip and remove the panel surrounding the shifter. (Figure A) 2. Remove (2) 9/32” screws from the bottom of the radio/climate control trim panel. (Figure B). 3. Unclip and remove the entire panel surrounding the radio and including the climate controls. (Figure B) 4. Remove (4) 9/32” screws securing the radio. Unplug and remove the Radio.
95-5812 Kit Assembley Double DIN Radio Provision 1. For the Ford Freestar 2004-07, Mercury Monterey 2004-2007, Ford Focus 2005-2007, and Ford F-Series Super Duty 2005-2007, Do not cut the rear mounting tabs from the double DIN brackets. If your vehicle is not listed above move to step 2. 2. If your vehicle was not listed above, attach the included spacers to the back of the (Figure A) radio housing mounting tabs. Cut and remove the rear mounting tabs. (Figure A) 3.
95-5812 Stacked ISO DIN Head Unit Provision 1. For the Ford Freestar 2004-07, Monterey 2004-07, Focus 2005-07, and the F Series Super Duty 2005-07, slide the included brackets onto the sides of the radio housings pocket from the back of the housing forward. (Figure A) If your vehicle is not listed above do not use brackets and move to step 2. 2. Attach the included spacers to the back of (Figure A) the radio housing mounting tabs.
REV. 9/26/11 INSTALLATION INSTRUCTIONS FOR PART 95-5817 METRA. THE WORLD’S BEST KITS.™ metraonline.