User Manual

ManualsBrandsMetra ManualsAutomotiveMetra 95-6513B Double DIN Dash Installation Kit for 2011 Jeep Grand Cherokee/Dodge Durango Vehicles (Black)

METRA. The World’s best kits.

™

metraonline.com1-800-221-0932

INSTALLATION INSTRUCTIONS FOR PART 95-6513B

REV. 4/30/2015 INST95-6513B

CAUTION: Metra recommends disconnecting the

negative battery terminal before beginning any

installation. All accessories, switches, and especially

air bag indicator lights must be plugged in before

reconnecting the battery or cycling the ignition.

NOTE: Refer to the instructions included with the

aftermarket radio.

Table of Contents

Dash Disassembly

– Dodge Durango 2011-2013 ................................. 2

– Jeep Grand Cherokee 2011-2013 ........................ 2

Kit Preparation ....................................................... 3

Kit Assembly

– Double DIN radio provision ................................... 3

• Double DIN radio provision

• Painted matte black to match factory

• A) Double DIN brackets

KIT FEATURES

KIT COMPONENTS

WIRING & ANTENNA CONNECTIONS (sold separately)

Wiring Harness: • CHTO-03 • XSVI-6522

Antenna Adapter: • 40-EU10

• Panel removal tool • Phillips screwdriver • Socket wrench • Cutting tool or file

TOOLS REQUIRED

Dodge Durango 2011-2013

Jeep Grand Cherokee 2011-2013

95-6513B

Summary of content (8 pages)

PAGE 1
INSTALLATION INSTRUCTIONS FOR PART 95-6513B Dodge Durango 2011-2013 Jeep Grand Cherokee 2011-2013 95-6513B Table of Contents Dash Disassembly –. Dodge Durango 2011-2013.................................. 2 –. Jeep Grand Cherokee 2011-2013......................... 2 Kit Preparation........................................................ 3 KIT FEATURES • Double DIN radio provision • Painted matte black to match factory Kit Assembly –. Double DIN radio provision....................................
PAGE 2
95-6513B Dash Disassembly Dodge Durango 2011-2013 Jeep Grand Cherokee 2011-2013 1. Unclip and remove the panel around the radio including the climate controls. (Figure A) 1. Unclip and remove the panel from around the radio including the vents and the climate controls. (Figure A) 2. Remove (4) 7mm screws securing the radio and remove. (Figure B) 2. Remove (4) 7mm screws securing radio to dash to remove. (Figure B) 3. Remove (3) 7mm screws securing the radio bracket to the sub dash. (Figure C) 3.
PAGE 3
95-6513B Kit Preparation Kit Assembly Double DIN radio provision 1. Modification to the sub dash is necessary for the aftermarket double DIN radio to fit. You will need to trim the top and bottom of the sub dash cavity. 1. Attach the double DIN brackets to the radio using the screws supplied with the radio. (Figure A) Continue to kit assembly 2. Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from (Figure A) (Figure A) 3 Metra or AXXESS.
PAGE 4
INSTALLATION INSTRUCTIONS FOR PART 95-6513B KNOWLEDGE IS POWER REV. 4/30/2015 INST95-6513B Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow. Metra recommends MECP certified technicians METRA. The World’s best kits.™ 1-800-221-0932 metraonline.
PAGE 5
INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 95-6513B Dodge Durango 2011-2013 Jeep Grand Cherokee 2011-2013 95-6513B Indice Desmontaje del tablero –. Dodge Durango 2011-2013.................................. 2 –. Jeep Grand Cherokee 2011-2013......................... 2 Preparación del kit................................................. 3 CARACTERÍSTICAS DEL KIT • Provisión de radio doble DIN • Pintura negro mate para igualar el acabado de fábrica Ensamble del kit –. Provisión de radio doble DIN..........
PAGE 6
95-6513B Desmontaje del tablero Dodge Durango 2011-2013 Jeep Grand Cherokee 2011-2013 1. Desenganche y quite el panel que rodea el radio, incluyendo los controles de clima. (Figura A) 1. Desenganche y quite el panel que rodea el radio, incluyendo las rejillas y los controles de clima. (Figura A) 2. Retire los (4) tornillos de 7mm que sujetan la radio y retire. (Figura B) 2. Retire los (4) tornillos de 7mm que sujetan el radio al tablero y retire. (Figura B) 3.
PAGE 7
95-6513B Preparación del kit Ensamble del kit Provisión de radio doble DIN 1. Es necesario modificar el sub tablero para que quepa el radio doble DIN. Tendrá que recortar la parte superior e inferior de la cavidad del sub tablero. 1. Coloque los soportes doble DIN en el radio de mercado secundario usando los tornillos que vienen con el radio. (Figura A) Continuará al ensamble del kit 2. Ubique el arnés de cableado de fábrica en el tablero.
PAGE 8
INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 95-6513B EL CONOCIMIENTO ES PODER Mejore sus habilidades deIS instalación y K NOWLEDGE POWER REV. 4/30/2015 INST95-6513B Enhance your installation and fabrication skills de by fabricación inscribiéndose en la escuela enrolling in the most recognized and respected dispositivos electrónicos móviles más reconocida mobile electronics school in our industry. Log onto www.installerinstitute.com or Regístrese call y respetada de nuestra industria.