User Manual

ManualsBrandsMetra ManualsAutomotiveMetra 95-7323 Double DIN Installation Kit for 2006-up Kia Sedona/Hyundai Entourage Vehicles (Black)

METRA. The World’s best kits.

™

metraonline.com1-800-221-0932

REV. 5/21/2015 INST95-7323

CAUTION: Metra recommends disconnecting the

negative battery terminal before beginning any

installation. All accessories, switches, and especially

air bag indicator lights must be plugged in before

reconnecting the battery or cycling the ignition.

NOTE: Refer to the instructions included with the

aftermarket radio.

INSTALLATION INSTRUCTIONS FOR PART 95-7323

• DoubleDINradioprovision

•A)DoubleTrimplate•B)DoubleDINbrackets

KIT FEATURES

KIT COMPONENTS

WIRING & ANTENNA CONNECTIONS(soldseparately)

WiringHarness:•70-1004•70-7303

AntennaAdapter:•40-KI11(2009-2014Sedona)

•Phillipsscrewdriver•Panelremovaltool

TOOLS REQUIRED

Hyundai Entourage 2007-2008

Kia Sedona 2006-2014

95-7323

A B

Dash Disassembly

– HyundaiEntourage2007-2008

... KiaSedona2006-2014.................................... 2

Kit Assembly

–

Double DINradioprovision............................... 3

Table of Contents

Summary of content (8 pages)

PAGE 1
INSTALLATION INSTRUCTIONS FOR PART 95-7323 Hyundai Entourage 2007-2008 Kia Sedona 2006-2014 95-7323 Table of Contents Dash Disassembly – Hyundai Entourage 2007-2008 ...Kia Sedona 2006-2014 .................................... 2 Kit Assembly KIT FEATURES • Double DIN radio provision – Double DIN radio provision............................... 3 KIT COMPONENTS • A) Double Trim plate • B) Double DIN brackets TOOLS REQUIRED • Phillips screwdriver • Panel removal tool REV.
PAGE 2
95-7323 Dash Disassembly 1. Unclip and remove panel surrounding shifter. (Figure A) 2. Remove (2) Phillips screws at bottom corners of panel surrounding radio. (Figure B) 3. Unclip and remove entire panel surrounding radio including the clock and a/c vents. (Figure C) 4. Remove (4) Phillips screws securing radio. 5. Unplug and remove the radio.
PAGE 3
95-7323 Kit Assembly Double DIN radio provision 1. Snap the Double DIN brackets to the inside edge of the Double DIN trim plate. (Figure A) 2. Slide the Double DIN radio into the bracket/trim plate assembly and secure the radio to the assembly using the screws supplied with the radio. (Figure B) 3. Locate the factory wiring harness and antenna plug in the dash. Metra recommends using the proper mating adapters from Metra and/or AXXESS. (Figure A) (Figure B) 4.
PAGE 4
INSTALLATION INSTRUCTIONS FOR PART 95-7323 KNOWLEDGE IS POWER REV. 5/21/2015 INST95-7323 Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow. Metra recommends MECP certified technicians METRA. The World’s best kits.™ 1-800-221-0932 metraonline.
PAGE 5
INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 95-7323 Hyundai Entourage 2007-2008 Kia Sedona 2006-2014 95-7323 – Hyundai Entourage 2007-2008 ... Kia Sedona 2006-2014 ........................................ 2 – Provisión de radio doble DIN.................................. 3 Componentes del kit • A) Placa de la moldura doble DIN • B) Soportes doble DIN REV.
PAGE 6
95-7323 Desmontaje del tablero 1. Desenganche y quite el panel que rodea la palanca de velocidades. (Figura A) 2. Retire los (2) tornillos Phillips en las esquinas inferiores del panel que rodea el radio. (Figura B) 3. Desenganche y retire todo el panel que rodea el radio, incluyendo el reloj y las rejillas del aire acondicionado. (Figura C) 4. Quite los (4) tornillos Phillips que sostienen el radio. (Figura A) (Figura B) 5. Desconecte y quite el radio.
PAGE 7
95-7323 Ensamble del kit Provisión de radio doble DIN 1. Coloque a presión los soportes Doble DIN en el borde interior de la placa de la moldura de Doble DIN. (Figura A) 2. Deslice el radio doble DIN en el soporte/ensamble de la placa de la moldura y sujete el radio al ensamble utilizando los tornillos suministrados con el radio. (Figura B) (Figura A) (Figura B) 3. Localice el arnés de cables de fábrica y el conector de la antena en el tablero.
PAGE 8
INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 95-7359B EL CONOCIMIENTO ESOWER PODER K NOWLEDGE IS P Mejore sus habilidades de instalación y fabricación REV. 5/21/2015 INST95-7323 Enhance your installation and fabrication skills by enrolling in the en most recognized and respected inscribiéndose la escuela de dispositivos electrónicos mobile school in our industry. móvileselectronics más reconocida y respetada de nuestra industria. Log onto www.installerinstitute.com or call Regístrese en www.