User Manual

ManualsBrandsMetra ManualsAudio & Video AccessoriesMetra 95-7325 Double DIN Installation Kit for 2007-up Hyundai Santa Fe Vehicles (Black) (Discontinued by Manufacturer)

INSTALLATION INSTRUCTIONS FOR PART 95-7325

APPLICATIONS

METRA. The World’s best kits.

™

metraonline.com1-800-221-0932

REV. 9/30/2012 INST95-7325

CAUTION: Metra recommends disconnecting the

negative battery terminal before beginning any

installation. All accessories, switches, and especially

air bag indicator lights must be plugged in before

reconnecting the battery or cycling the ignition.

NOTE: Refer to the instructions included with the

aftermarket radio.

Table of Contents

Dash Disassembly

– Hyundai Santa Fe 2007-2012 ............................... 2

Kit Assembly

– Double DIN radio provision ................................... 3

– Stacked ISO radio provision .................................. 3

• Double DIN radio provision

• Stacked ISO radio provision

• A) Double DIN trim plate • B) Double DIN brackets

KIT FEATURES

KIT COMPONENTS

WIRING & ANTENNA CONNECTIONS (sold separately)

Wiring Harness: • 70-7302 - Hyundai harness 2007-2009 • 70-7303 - Hyundai/Kia harness 2009-up

Antenna Adapter: • 40-KI11 - Hyundai Santa Fe adapter 2009-up

• Panel removal tool • Phillips screwdriver • Socket wrench

TOOLS REQUIRED

A B

Hyundai Santa Fe 2007-2012

(not for factory equipped NAV models)

95-7325

Summary of content (8 pages)

PAGE 1
INSTALLATION INSTRUCTIONS FOR PART 95-7325 APPLICATIONS Table of Contents Hyundai Santa Fe 2007-2012 (not for factory equipped NAV models) Dash Disassembly 95-7325 – Hyundai Santa Fe 2007-2012............................... 2 Kit Assembly – Double DIN radio provision ................................... 3 KIT FEATURES • Double DIN radio provision • Stacked ISO radio provision – Stacked ISO radio provision..................................
PAGE 2
Dash Disassembly 95-7325 Hyundai Santa Fe 2007-2012 1. Remove (1) Phillips screw from the right side of the panel below the steering column then unclip and let right side of panel hang. (Figure A) 2. Unclip and remove the cover above the clock on top of panel surrounding the radio. (Figure B) 3. Unclip and remove the panel extending across the dash below the A/C control and above the glove box including the ash tray. (Figure C) (Figure A) (Figure B) (Figure C) (Figure D) 4.
PAGE 3
Kit Assembly 95-7325 Double DIN radio provision Stacked ISO radio provision 1. Snap the Double DIN brackets to the outside edge of the Double DIN trim plate. (Figure A) 1. Snap the Double DIN brackets to the outside edge of the Double DIN trim plate. (Figura A) 2. Slide the Double DIN radio into the bracket/trim plate assembly and secure the radio to the assembly using the screws supplied with the radio. (Figure B) 2.
PAGE 4
INSTALLATION INSTRUCTIONS FOR PART 95-7325 KNOWLEDGE IS POWER REV. 9/30/2012 INST95-7325 Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow. Metra recommends MECP certified technicians METRA. The World’s best kits.™ 1-800-221-0932 metraonline.
PAGE 5
INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 95-7325 APLICACIONES Indice Hyundai Santa Fe 2007-2012 (no para los modelos equipados de fábrica NAV) Desmontaje del tablero 95-7325 – Hyundai Santa Fe 2007-2012............................... 2 Ensamble del kit – Provisión de radio doble DIN................................. 3 CARACTERÍSTICAS DEL KIT • Provisión de radio doble DIN • Provisión de radio ISO verticales – Provisión de radio ISO verticales ..........................
PAGE 6
Desmontaje del tablero 95-7325 Hyundai Santa Fe 2007-2012 1. Quite (1) tornillo Phillips del lado derecho del panel debajo de la columna de dirección y suelte y deje que el lado derecho del panel cuelgue. (Figura A) 2. Desenganche y quite la tapa sobre el reloj en la parte superior del panel que rodea el radio. (Figura B) 3. Desenganche y quite el panel que se extiende a lo largo del tablero debajo del control del aire acondicionado y arriba de la guantera, incluyendo el cenicero.
PAGE 7
Ensamble del kit 95-7325 Provisión de radio doble DIN Provisión de radio ISO verticales 1. Coloque a presión los soportes doble DIN en el borde exterior de la placa de la moldura de doble DIN. (Figura A) 1. Coloque a presión los soportes doble DIN en el borde exterior de la placa de la moldura de doble DIN. (Figura A) 2. Deslice el radio doble DIN en el soporte/ensamble de la placa de la moldura y sujete el radio al ensamble utilizando los tornillos suministrados con el radio. (Figura B) 2.
PAGE 8
INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 95-7325 EL CONOCIMIENTO ES PODER sus habilidades IS de instalación y KMejore NOWLEDGE POWER REV. 9/30/2012 INST95-7325 Enhance your installation and fabrication skills byde fabricación inscribiéndose en la escuela enrolling in the most recognized and respected dispositivos electrónicos mobile electronics school in ourmóviles industry.más reconocida Logy onto www.installerinstitute.com or call respetada de nuestra industria.