User Manual

ManualsBrandsMetra ManualsAutomotiveMetra 95-7357HG Double DIN Dash Kit for 2013- Hyundai Elantra GT (High Gloss Black)

APPLICATIONS

METRA. The World’s best kits.

™

metraonline.com1-800-221-0932

REV. 3/24/2015 INST95-7357HG

CAUTION: Metra recommends disconnecting the

negative battery terminal before beginning any

installation. All accessories, switches, and especially

air bag indicator lights must be plugged in before

reconnecting the battery or cycling the ignition.

NOTE: Refer to the instructions included with the

aftermarket radio.

Table of Contents

INSTALLATION INSTRUCTIONS FOR PART 95-7357HG

• Double DIN radio provision

• Painted high gloss black

• A) Radio Housing Trim Panel • B) Brackets

KIT FEATURES

KIT COMPONENTS

WIRING & ANTENNA CONNECTIONS (sold separately)

Wiring Harness: • 70-7304 harness or HYBL-01 interface

Antenna Adapter: • Not Required

• Panel removal tool • Phillips screwdriver

TOOLS REQUIRED

Hyundai Elantra GT 2013-up

95-7357HG

Dash Disassembly

– Hyundai Elantra 2013-up ..................................... 2

Kit Assembly

– Double DIN radio provision ................................... 3

Summary of content (8 pages)

PAGE 1
INSTALLATION INSTRUCTIONS FOR PART 95-7357HG APPLICATIONS Hyundai Elantra GT 2013-up 95-7357HG Table of Contents Dash Disassembly – Hyundai Elantra 2013-up ..................................... 2 Kit Assembly – Double DIN radio provision ................................... 3 KIT FEATURES • Double DIN radio provision • Painted high gloss black KIT COMPONENTS • A) Radio Housing Trim Panel • B) Brackets REV.
PAGE 2
95-7357HG Dash Disassembly 1. Unsnap and remove the vent panels from either side of the radio down to the shifter base. (Figure A) 2. Remove four screws and remove radio.
PAGE 3
95-7357HG Kit Assembly Double DIN radio provision 1. Attach the brackets to the radio housing trim panel. (Figure A) 2. Slide the radio into the bracket/ radio housing assembly and secure to the assembly using the screws supplied with the radio. (Figure B) 3. Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Re-connect the negative battery terminal and test the unit for proper operation. (Figure A) (Figure B) 4.
PAGE 4
INSTALLATION INSTRUCTIONS FOR PART 95-7357HG KNOWLEDGE IS POWER REV. 3/24/2015 INST95-7357HG Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow. Metra recommends MECP certified technicians METRA. The World’s best kits.™ 1-800-221-0932 metraonline.
PAGE 5
INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 95-7357HG AplicAciones Hyundai Elantra GT 2013 y mas 95-7357HG Indice Desmontaje del tablero – Hyundai Elantra GT 2013 y mas ........................... 2 Ensamble del kit – Provisión de radio doble DIN ................................. 3 cArActerísticAs del kit • Provisión de radio doble DIN • Pintura negra de alto brillo componentes del kit • A) Panel de la moldura para carcasa del radio • B) Soportes REV.
PAGE 6
95-7357HG Desmontaje del tablero 1. Suelte a presión y quite los paneles de las rejillas de cada lado del radio hacia la base de la palanca de velocidades. (Figura A) 2. Quite los (4) tornillos y quite el radio.
PAGE 7
95-7357HG Ensamble del kit Provisiones de unidad central ISO DDIN 1. Una los soportes al panel de la moldura de la carcasa del radio. (Figura A) 2. Deslice el radio dentro del ensamble del soporte/la carcasa del radio y sujételo al ensamble con los tornillos suministrados con el radio. (Figura B) 3. Localice el arnés de cableado de fábrica y el conector de la antena en el tablero. Metra recomienda que use adaptadores adecuados de acoplamiento de Metra y/o de AXXESS. (Figura A) (Figura B) 4.
PAGE 8
INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 95-7357HG EL CONOCIMIENTO ESOWER PODER K NOWLEDGE IS P Mejore sus habilidades de instalación y fabricación REV. 3/24/2015 INST95-7357HG Enhance your installation and fabrication skills by enrolling in the en most recognized and respected inscribiéndose la escuela de dispositivos electrónicos mobile school in our industry. móvileselectronics más reconocida y respetada de nuestra industria. Log onto www.installerinstitute.com or call Regístrese en www.