User Manual

ManualsBrandsMetra ManualsAutomotiveMetra 95-7364B Double DIN Dash Kit for Select 2014- Hyundai Tucson Vehicles (Black)

REV. 6/20/2016 INST95-7364B

METRA. The World’s best kits.

™

metraonline.com

Installation instructions for part 95-7364B

CAUTION!

All accessories, switches, climate controls panels, and

especially air bag indicator lights must be connected before cycling

the ignition. Also, do not remove the factory radio with the key in the

on position, or while the vehicle is running.

• ISO DDIN radio provision

• Painted matte black

• A) Radio trim panel • B) Radio brackets

KIT FEATURES

KIT COMPONENTS

WIRING & ANTENNA CONNECTIONS (sold separately)

Wiring Harness: • 70-7304, HYBL-03 (nav models), HYBL-04

Antenna Adapter: • Not required

• Phillips screwdriver • Panel removal tool

TOOLS REQUIRED

Hyundai Tucson (with NAV) /

Tucson

(with 4.3” screen) 2014-2015

95-7364B

A B

Dash Disassembly ................................................. 2

Kit Assembly

– ISO DDIN radio provision ...................................... 3

Table of Contents

Summary of content (8 pages)

PAGE 1
Installation instructions for part 95-7364B Hyundai Tucson (with NAV) / Tucson (with 4.3” screen) 2014-2015 95-7364B Table of Contents Dash Disassembly.................................................. 2 Kit Assembly –. ISO DDIN radio provision....................................... 3 KIT FEATURES • ISO DDIN radio provision • Painted matte black KIT COMPONENTS • A) Radio trim panel • B) Radio brackets REV.
PAGE 2
95-7364B Dash Disassembly 1. Unclip and remove trim panel above the radio. (Figure A) 2. Unclip and remove the hazard switch panel. (Figure B) 3. Remove (4) Phillips screws securing the radio.
PAGE 3
95-7364B Kit Assembly ISO DDIN radio provision 1. Mount the radio to the radio brackets with the screws supplied with the radio. (Figure A) 2. Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Re-connect the negative battery terminal and test the unit for proper operation. 3. Mount the radio into the dash. 4. Clip the radio trim plate over the radio/pocket assembly and reassemble dash in reverse order of disassembly.
PAGE 4
Installation instructions for part 95-7364B IMPORTANT If you are having difficulties with the installation of this product, please call our Tech Support line at 1-800-253-TECH. Before doing so, look over the instructions a second time, and make sure the installation was performed exactly as the instructions are stated. Please have the vehicle apart and ready to perform troubleshooting steps before calling. KNOWLEDGE IS POWER REV.
PAGE 5
Instrucciones de instalación para la pieza 95-7364B Hyundai Tucson (con NAV) / Tucson (con pantalla de 4.3”) 2014-2015 95-7364B Desmontaje del tablero.............................................2 Ensamble del kit –. Provisión de radio ISO DDIN................................... 3 CARACTERÍSTICAS DEL KIT • Provisión de radio ISO DDIN • Pintado negro mate COMPONENTES DEL KIT • A) Panel de moldura para la carcasa del radio • B) Soportes REV.
PAGE 6
95-7364B Desmontaje del tablero 1. Desenganche y quite el panel de la moldura que está arriba del radio. (Figura A) 2. Desenganche y quite el panel del interruptor de las luces intermitentes. (Figura B) 3. Quite los (4) tornillos Phillips que sujetan el radio.
PAGE 7
95-7364B Ensamble del kit Provisión de radio ISO DDIN 1. Monte el radio en los soportes con los tornillos que vienen con el radio. (Figura A) 2. Localice el arnés de cables de fábrica en el tablero. Metra recomienda el uso de un adaptador adecuado de acoplamiento de Metra o de AXXESS. Vuelva a conectar la terminal negativa de la batería y pruebe la unidad para verificar que funcione correctamente. 3. Monte el ensamble de radio/soporte en el tablero. 4.
PAGE 8
Instrucciones de instalación para la pieza 95-7364B IMPORTANTE Si tiene dificultades con la instalación de este producto, llame a nuestra línea de soporte técnico al 1-800-253-TECH. Antes de hacerlo, revise las instrucciones por segunda vez y asegúrese de que la instalación se haya realizado exactamente como se indica en las instrucciones. Por favor tenga el vehículo desarmado y listo para ejecutar los pasos de resolución de problemas antes de llamar.