User Manual

ManualsBrandsMetra ManualsAutomotiveMetra 95-7522B Double DIN Dash Installation Kit for Select MAZDA CX-5 2012-UP Vehicles

METRA. The World’s best kits.

™

metraonline.com

REV. 7/31/2015 INST95-7522B

Installation instructions for part 95-7522B

CAUTION!

Metra recommends disconnecting the negative bat

tery terminal before beginning any installation, unless the vehicle

manufacturer recommends against so. Please check with your local

Dealership for more information. All accessories, switches, climate

controls panels, and especially air bag indicator lights must be con

nected before reconnecting the battery or cycling the ignition. Also,

do not remove the factory radio with the key in the on position, or the

vehicle running. It would be best to remove the key from the ignition

and then wait a few seconds before removing the factory radio.

• ISO DDIN radio provision

• Painted matte black to match factory finish

• A) Radio housing • B) Radio brackets • C) (4) Panel clips • D) (4) #8 x 3/8” Phillips truss head screws

KIT FEATURES

KIT COMPONENTS

WIRING & ANTENNA CONNECTIONS (sold separately)

Wiring Harness: • 70-7903 • AX-LCD (Mazda6 only)

Antenna Adapter: • 40-HD10

• Panel removal tool • Phillips screwdriver

TOOLS REQUIRED

Mazda CX-5 2013-up, Mazda6 2014-2015

95-7522B

Dash Disassembly ................................................. 2

Kit Assembly

– ISO DDIN radio provision ...................................... 2

Table of Contents

A B C D

Summary of content (8 pages)

PAGE 1
Installation instructions for part 95-7522B Mazda CX-5 2013-up, Mazda6 2014-2015 95-7522B Table of Contents Dash Disassembly.................................................. 2 Kit Assembly –. ISO DDIN radio provision.......................................
PAGE 2
95-7522B Dash Disassembly 1. Unsnap and remove the trim panel above the glove box and climate controls. This panel will include the climate vents and hazard button. (Figure A) Note: Do not cycle the key while the hazard button is disconnected. 2. Unsnap and remove the trim from around the factory radio. (Figure B) 3. Remove (2) Phillips screws securing the factory radio and remove it.
PAGE 3
95-7522B Kit Assembly ISO DDIN radio provision 1. Install the (4) included panel clips to the back of the Radio Housing. Note: The factory clips removed in disassembly can also be used if so desired. 2. Attach the Radio Brackets to the Radio Housing with (4) #8 x 3/8” Phillips truss head screws supplied. (Figure A) 3. Slide the radio into the completed assembly and secure with screws supplied with the radio. (Figure B) 4. Locate the factory wiring harness in the dash.
PAGE 4
Installation instructions for part 95-7522B IMPORTANT If you are having difficulties with the installation of this product, please call our Tech Support line at 1-800-253-TECH. Before doing so, look over the instructions a second time, and make sure the installation was performed exactly as the instructions are stated. Please have the vehicle apart and ready to perform troubleshooting steps before calling. KNOWLEDGE IS POWER REV.
PAGE 5
Instrucciones de instalación para 95-7522B Mazda CX-5 2013 y mas, Mazda6 2014-2015 95-7522B Indice Desmontaje del tablero.......................................... 2 Ensamble del kit –. Provisión de unidad central ISO DDIN....................
PAGE 6
95-7522B Desmontaje del tablero 1. Suelte a presión y quite la moldura de arriba de la guantera de lado a lado y centrales de clima artificial.Este panel incluirá las rejillas de ventilación del clima y el botón de peligro. (Figura A) Nota: No ciclo de la tecla mientras se desconecta el botón peligro. 2. Suelte y retire el ajuste de todo el radio de fábrica. (Figura B) 3. Quite los (2) tornillos Phillips que sostienen el radio de fábrica y quítelo.
PAGE 7
95-7522B Ensamble del kit Provisión de unidad central ISO DDIN 1. Instale los (4) ganchos del panel incluidos en la parte posterior del panel de la Carcasa del Radio. Nota: Los clips de fábrica retirados en el desmontaje también se pueden utilizar si así se desea. 2. Fije el conjunto completo a la vivienda de la Carcasa del Radio con (4) #8 x 3/8 “ tornillos Phillips de cabeza celosía suministrados. (Figura A) 3.
PAGE 8
Instrucciones de instalación para 95-7522B IMPORTANTE Si tiene dificultades con la instalación de este producto, llame a nuestra línea de soporte técnico al 1-800-253-TECH. Antes de hacerlo, revise las instrucciones por segunda vez y asegúrese de que la instalación se haya realizado exactamente como se indica en las instrucciones. Por favor tenga el vehículo desarmado y listo para ejecutar los pasos de resolución de problemas antes de llamar.